I just got my DFI Lanparty NFII Ultra B back from RMA and it seems to be broken, again.
I'm getting things like this when attempting to install windows:
Blue Screens:
right after loading sil3114 driver and windows installer begins to load
*** STOP: 0x0000007E (0xC0000005, 0x808D5534, 0xF7C82310, 0xF7F82010)
began file copy, 1% done
IRQL_NOT_LESS_OR_EQUAL
*** STOP: 0x0000000A (0x00000010, 0x00000002, 0x00000000, 0x807D4412)
right after loading sil3114 driver and windows installer begins to load
*** STOP: 0x0000007B (0xF7C8263C, 0xC0000034, 0x00000000, 0x00000000)
Lockups:
When the setup says loading windows.
1% into full format.
5% into full format.
25% into file copy.
75% into file copy. (the farthest I ever got)
Does this mean the controller/mobo is shot? or is there something I should try? You can see my system specs on my sig.
I have tried my 2 36gb raptors in raid0 and alone.
I got a brand new retail box back when I sent in my board for RMA repair at Newegg. My orrigional board was RMAed because it would go completely unstable at anything higher than 166mhz fsb. I replaced every single component in my computer trying to figure that one out and ended up replacing the mobo last.
I'd be happy to provide any additional info you would like to know.
-Folken
<A HREF="http://www.folken.net/myrig.htm" target="_new">My precious...</A>
I'm getting things like this when attempting to install windows:
Blue Screens:
right after loading sil3114 driver and windows installer begins to load
*** STOP: 0x0000007E (0xC0000005, 0x808D5534, 0xF7C82310, 0xF7F82010)
began file copy, 1% done
IRQL_NOT_LESS_OR_EQUAL
*** STOP: 0x0000000A (0x00000010, 0x00000002, 0x00000000, 0x807D4412)
right after loading sil3114 driver and windows installer begins to load
*** STOP: 0x0000007B (0xF7C8263C, 0xC0000034, 0x00000000, 0x00000000)
Lockups:
When the setup says loading windows.
1% into full format.
5% into full format.
25% into file copy.
75% into file copy. (the farthest I ever got)
Does this mean the controller/mobo is shot? or is there something I should try? You can see my system specs on my sig.
I have tried my 2 36gb raptors in raid0 and alone.
I got a brand new retail box back when I sent in my board for RMA repair at Newegg. My orrigional board was RMAed because it would go completely unstable at anything higher than 166mhz fsb. I replaced every single component in my computer trying to figure that one out and ended up replacing the mobo last.
I'd be happy to provide any additional info you would like to know.
-Folken
<A HREF="http://www.folken.net/myrig.htm" target="_new">My precious...</A>