Dell Dim 2400 front panel config (0/2)

[Guest]

Archived from groups: alt.sys.pc-clone.dell (More info?)

I'm trying to put a 2400 board in a standard case. the wires in the
standard case will fit the blue slot, but what i would like to know is
which one is for power and which one is for lights.

i've included some photo's of what i'm talking about.
please help.

 

[Guest]

Archived from groups: alt.sys.pc-clone.dell (More info?)

Take a look at www.roberthancock.com, which has some of the Dell boards
diagrammed.



"no1@home" <no1@home.com> wrote in message
news:8ip7o0p7557skspq09l26gqihdii55mhdf@4ax.com...
> I'm trying to put a 2400 board in a standard case. the wires in the
> standard case will fit the blue slot, but what i would like to know is
> which one is for power and which one is for lights.
>
> i've included some photo's of what i'm talking about.
> please help.

 

[Guest]

Archived from groups: alt.sys.pc-clone.dell (More info?)

i've looked at the site mentioned, and it was somewhat informitive.
but he didn't have the info on the newer Dimension 2400 series. the
photo i posted shows a blue square connector, and what i need to know
is, which pin(s) is for power switch, hd light...ect.

i've been to Dell's web site as well, but was unable to find the info.
if any one here has a 2400, if you could, pull the cover and see what
color the wires are and which wire goes to which pin. this should be
easy to do. i hope.

thanx

On Sat, 30 Oct 2004 20:52:48 GMT, "Edward J. Neth"
<ejn63@netscape.net> wrote:

>Take a look at www.roberthancock.com, which has some of the Dell boards
>diagrammed.
>
>
>
>"no1@home" <no1@home.com> wrote in message
>news:8ip7o0p7557skspq09l26gqihdii55mhdf@4ax.com...
>> I'm trying to put a 2400 board in a standard case. the wires in the
>> standard case will fit the blue slot, but what i would like to know is
>> which one is for power and which one is for lights.
>>
>> i've included some photo's of what i'm talking about.
>> please help.
>

 

[Guest]

Archived from groups: alt.sys.pc-clone.dell (More info?)

well hereis what i found out about the pin layout in the 2400.
i've attatched a photo with color code.



On Sat, 30 Oct 2004 19:15:46 -0400, "no1@home" <no1@home.com> wrote:

>i've looked at the site mentioned, and it was somewhat informitive.
>but he didn't have the info on the newer Dimension 2400 series. the
>photo i posted shows a blue square connector, and what i need to know
>is, which pin(s) is for power switch, hd light...ect.
>
>i've been to Dell's web site as well, but was unable to find the info.
>if any one here has a 2400, if you could, pull the cover and see what
>color the wires are and which wire goes to which pin. this should be
>easy to do. i hope.
>
>thanx
>
>On Sat, 30 Oct 2004 20:52:48 GMT, "Edward J. Neth"
><ejn63@netscape.net> wrote:
>
>>Take a look at www.roberthancock.com, which has some of the Dell boards
>>diagrammed.
>>
>>
>>
>>"no1@home" <no1@home.com> wrote in message
>>news:8ip7o0p7557skspq09l26gqihdii55mhdf@4ax.com...
>>> I'm trying to put a 2400 board in a standard case. the wires in the
>>> standard case will fit the blue slot, but what i would like to know is
>>> which one is for power and which one is for lights.
>>>
>>> i've included some photo's of what i'm talking about.
>>> please help.
>>