[SOLVED] Dell Optiplex 7010 SFF PSU UPGRADE

Sep 7, 2019
7
1
15
Hello everyone,
im looking forward to upgrading my Dell Optiplex 7010 SFF (Model Number: AC240ES-01) to a standard ATX PSU. The reason is that im transplanting the whole computer to a normal ATX Case for GPU Reasons and stuff. A pinout diagramm would help a lot. I also read on the forums that you can use a standard ATX PSU in the normal 7010 because the PSU uses the same pinout.
Looking forward to your replies.
 
Solution
Again, PSUs are ATX standardised.
So any ATX PSU will be fine.

Your motherboard is ATX standard by the image and by what I have read on the technical sheets.
The PSU is ATX. Obviously just isn't small form factor.
Sep 7, 2019
7
1
15
atx_power_supply_pinout.png
So this is a Dell Optiplex 990 SFF Power Supply. I compared it to my PSU´s pinout and its the same.

And this is a be quiet Power Zone 1´s Pinout. As you can see. its the same. So it should work right?
BeQuiet-PowerZone-Z1b.png
 
Sep 7, 2019
7
1
15
Welcome to the forums my friend!
What is going to be the rest of your system spec so we know what wattage PSU you require.
What is your budget and location?
Thanks for the Answer. Im converting this pc to be a little gaming pc with a strix 1060 6gb. Wattage should be around 600 Watts for future plans and upgrades