"Device not migrated" for new device

[VincentRustico]

I got a new flight controller for my flight sim this week (see https://www.logitechg.com/en-us/product/flight-sim-yoke-system) and when I plugged it in and installed the latest drivers for it, I found that the main yoke part works just fine, but the throttle quadrant part that plugs into the yoke via PS2 connection is not recognized at all by neither Windows nor my flight sim. I have tried just about everything I can think of (uninstalling/reinstalling the device drivers, updated chipset, updated BIOS, ran sfc/scannow in Windows Command, disabled/enabled device, ran joy.cpl to see if it registers input--it does not) and there is still a "Device not migrated" entry in the Events tab of the device properties. I have no idea what else to do. I don't think the device has a hardware issue, because the power light is illuminated and there are no visible defects, but I have found online that the migration issues causes devices not to work; I just have no idea how to fix it. ANY help is appreciated. I contacted Logitech but their support is subpar. Thanks so much in advance.

 

[Colif]

Is this the driver you installed? http://support.logitech.com/en_us/product/flight-sim-yoke-system/downloads

Have you thought to ask on the logitech support forums as I would suspect this may have happened before - https://community.logitech.com/s/topic/0TO31000000Dl6QGAS/simulation

The FAQ: http://support.logitech.com/en_us/product/flight-sim-yoke-system/faq

tried changing USB ports?

I am not Windows expert but it was giving this warning, maybe someone can make sense of it: "Device HID\VID_044F&PID_B687\9&4704ad9&0&0000 was not migrated due to partial or ambiguous match."

So I changed the port and now it works all the time...I hope

https://www.reddit.com/r/hotas/comments/7l571i/problem_with_target_and_combined_device/