Question Disc drive has become noisy

abbarich

Distinguished
Oct 30, 2014
113
1
18,585
A week ago I shut my laptop off and I realised I'd left a DVD-RW in the disc drive. I turned it back on and removed it a few minutes later. Last night I put the same DVD-RW in the drive which I hadn't used for a week, and it s now making a much louder noise than normal, a clicking grinding sort of noise. I tested it to see if it was still working by burning a few small files onto the disc. It's done this okay but it was so noisy. Have I damaged the drive? Does anyone have any advice? Thanks
 

Lutfij

Titan
Moderator
What is the make, model and SKU of your laptop? In fact, you can skip that if you tell me what the make and model of your optical drive is. Pretty much all optical drives meant for the laptop would have a central hub/puck that the disc would need to latch onto before you can push the disc drive's tray in. If the disc was on said latch then no, the disc didn't' cause any damage to your drive. That's my mindset/thought process.
 

abbarich

Distinguished
Oct 30, 2014
113
1
18,585
Thanks for the reply. The laptop is a Lenovo ideapad 100. Leaving the disc in while it shut down has caused the drive to become very noisy, so I wasn't sure if it's damaged in some way. It's a loud sort of clattering grinding sound but I can't see any damage to the disc after I've removed it. Will the noise settle down eventually? Maybe I should leave it a while before using it again?
 

KingLoki

Upstanding
Jul 10, 2024
451
70
270
Have you thought of cleaning out the inside of the drive just incase of any dust/debris has got in. Compressed air blower by actual compressor unit or canned compressed air would be worth a try. Just in case. Otherwise a new drive might be needed due to unknown damage to the motor.
 

abbarich

Distinguished
Oct 30, 2014
113
1
18,585
Since I started this thread I left the disc drive alone for a month and I successfully burned some files to a dvd-r though it was noisier than normal as it was burning but no problem with the end result. However last night I tried to burn some files onto a cd-r this time and it got stuck at 99%. I let it continue for about 5 minutes but it didn't complete as it normally does so I had to eventually cancel it. I've wasted that disc. This is happening after I accidentally left a disc in the drive when I shut down a few weeks ago.If I avoid windows media and try using something like Nero will I have the same issue? Its strange I was able to do a successful dvd-r before though. Sadly I think my drive is finished and I'm not sure how to repair it even if it's possible. I'd be very grateful for any tips. Thanks.
 

Misgar

Respectable
Mar 2, 2023
1,865
494
2,090
Sadly I think my drive is finished and I'm not sure how to repair it even if it's possible.

Chances are it's not economic to repair the drive, but replacement should be possible. Unlike older laptops where you simply moved a sliding clip to eject the drive, the Ideapad needs a few more operations.

Check this video and if necessary, pass the job on to a competent person. Messing around with small screws and delicate ribbon cables can be tricky.
View: https://www.youtube.com/watch?v=VU3DyH0SNbI


I found this replacement (second hand?) drive, Lenovo part number DA8AESH on eBay going cheap.
https://www.ebay.co.uk/p/25012228275

Check your local online stores, but it's probably best to remove the existing drive first and check the part number before ordering.

With such an old item, you may have trouble finding a replacement.

https://www.amazon.com/Writer-DA8AE...id=1731857700&sprefix=da8aesh+,aps,128&sr=8-2

61HJU35PnqL._AC_SL1074_.jpg