Question Do these 2 ram sticks work togheter?

[AlwaysReaper]

Adata premier 2400 16gb single channel ddr4

+

Kingston 2400 8gb single channel ddr4

On h310mk( This mobo doesn't support ram over 2666 right?)
i5-9600KF

 

[boju]

Might work, mixing ram isn't guaranteed even if same specs.

Make sure you can return ram if doesn't work. If go ahead, put 8gb in first slot and 16gb in second for flex mode.

See dimm slot placement for flex mode, bottom of page. Four dimm diagram albeit same placement order for a two slot mobo.

https://www.intel.com.au/content/www/au/en/support/articles/000005657/boards-and-kits.html

 

[AlwaysReaper]

Might work, mixing ram isn't guaranteed even if same specs.

Make sure you can return ram if doesn't work. If go ahead, put 8gb in first slot and 16gb in second for flex mode.

See dimm slot placement for flex mode, bottom of page. Four dimm diagram albeit same placement order for a two slot mobo.

https://www.intel.com.au/content/www/au/en/support/articles/000005657/boards-and-kits.html

Will it work at 24gb or it will reduce 8 gb from second stick and only work at 16 gb?

 

[Deleted member 14196]

Will it work at 24gb or it will reduce 8 gb from second stick and only work at 16 gb?

Nobody here can answer that question and for you to find out you’re gonna have to plug them in and try it

 

[boju]

Will it work at 24gb or it will reduce 8 gb from second stick and only work at 16 gb?

If mixing works, it'll be 24gb total yes. Half the 16gb in dual channel and remaining 8 single channel as explained in the link.

 

[Third-Eye]

Adata premier 2400 16gb single channel ddr4

+

Kingston 2400 8gb single channel ddr4

On h310mk( This mobo doesn't support ram over 2666 right?)
i5-9600KF

Two differing sized modules can work in asynchronous dual channel mode if the motherboard supports it. The lower capacity module will determine how much ram is available to the operating system. In your case it will be 16GB (2x8GB.) Data transfer speed might be slower or it might be at the expected speed. If it's not listed in the manual as a setting to change, the only way to know if it works is to just try it. If it works it will likely still be worth using over a single module even if it's slower than two identical modules.

 

[algorithmbreaker]

Adata premier 2400 16gb single channel ddr4

+

Kingston 2400 8gb single channel ddr4

On h310mk( This mobo doesn't support ram over 2666 right?)
i5-9600KF

Yes, it should work fine. Does support 2666MHz.

For ASUS PRIME H310M-K memory

https://www.memorystock.com/memory/ASUSPRIMEH310MK.html

for specs

https://www.asus.com/Motherboards/PRIME-H310M-K/specifications/