Question Driver for 3com 3c905c-tx-m

[martin0300]

I found a 3com 3c905c-tx-m ethernet card for my pc afther the psu fried my onboard NIC.
But I can't find a driver for Windows 7 64bit anywhere.
I can find old downloads but those don't work!
Where can I find a driver from?

 

[Lutfij]

afther the psu fried my onboard NIC
You might have more problems than that, if your PSU fried a component on the board.

You can run the installer for the older drivers in Compatibility Mode, i.e, Right click installer>Properties>Compatibility Tab>Windows 7(from the drop down menu).

 

[martin0300]

afther the psu fried my onboard NIC
You might have more problems than that, if your PSU fried a component on the board.

You can run the installer for the older drivers in Compatibility Mode, i.e, Right click installer>Properties>Compatibility Tab>Windows 7(from the drop down menu).

I don't know because I see nothing else wrong with the motherboard and only the +5VSB line was on 10V it only fried all my connected usb devices and my onboard NIC. When a ethernet port is plugged into the onboard NIC it flashes for a second turns off and does that until the ethernet cord is unplugged. Windows does recognise the onboard NIC and installs the driver for it and when the ethernet is plugged in it tries to identify the network but it fails (I tried it on other OSes but it doesnt work). But i'll be trying the compability mode.