I'd been experiencing frequent BSODs and crashes that prompted me to believe there may be some driver problems and found the Windows Driver Verifier. Ignorantly I didn't properly read up on the potential problems this application could cause, and ignored the warning signs that were explicit both on the website and application about using this on test PCs. It wasn't until after running the Driver Verifier that I realized that this isn't needed for most consumer uses. I used the 'Automatically select all drivers installed on this computer' option.
Upon restarting I was met with no input to my monitor, whether directly to my GPU or motherboard. I've tried resetting the CMOS by both shorting the PINs and removing the battery, as this was the only potential solution I was able to find. I've unplugged and reseated everything on the motherboard, and don't know how to proceed.
Unfortunately I'm still stuck with a computer that won't display anything on my monitors, I'm not even sure if it is posting or what but I'm completely incapable of getting my computer to output anything to my displays. Other solutions talk about disabling Driver Verifier but I can't even access my BIOS or anything, let alone boot into windows in a way that I'm able to access the command prompt.
I feel like a complete fool because I'd disregarded the warning signs but didn't think that it would have been this much of an issue. I'm on my wits end and am close to bringing it in to a shop, but this is my hail mary prior to doing so.
RAM: G.SKILL Ripjaws V Series 32 GB DDR4 3200
MOBO: ASUS PRIME Z270-P
GPU: EVGA GTX 1080Ti
CPU: I7-7700K
Not quite sure what other information I can provide at the time. Let me know if you have any questions as I'd like to solve this.
Thanks ahead, and pardon my stupidity.
Upon restarting I was met with no input to my monitor, whether directly to my GPU or motherboard. I've tried resetting the CMOS by both shorting the PINs and removing the battery, as this was the only potential solution I was able to find. I've unplugged and reseated everything on the motherboard, and don't know how to proceed.
Unfortunately I'm still stuck with a computer that won't display anything on my monitors, I'm not even sure if it is posting or what but I'm completely incapable of getting my computer to output anything to my displays. Other solutions talk about disabling Driver Verifier but I can't even access my BIOS or anything, let alone boot into windows in a way that I'm able to access the command prompt.
I feel like a complete fool because I'd disregarded the warning signs but didn't think that it would have been this much of an issue. I'm on my wits end and am close to bringing it in to a shop, but this is my hail mary prior to doing so.
RAM: G.SKILL Ripjaws V Series 32 GB DDR4 3200
MOBO: ASUS PRIME Z270-P
GPU: EVGA GTX 1080Ti
CPU: I7-7700K
Not quite sure what other information I can provide at the time. Let me know if you have any questions as I'd like to solve this.
Thanks ahead, and pardon my stupidity.