When I first built my pc I used a dvi connection to connect my proview monitor to intel graphics 3000 using a gigabyte z68a-d3h-b3 with the latest f13 bios. Everything worked great, then i decided to use my lcdtv as a display, so i removed the dvi monitor and hooked up the lcdtv with an hdmi cable. Worked with no issue. Once I was done I hooked the pc back up to my proview monitor through dvi and got no signal. So I decided to try the hdmi that was working previously but that also didnt work. I got an old vga monitor and hooked it up and that worked.
So the vga monitor works, when just the dvi monitor is plugged in , there is no signal even during the post screen only reason i know its on is because i can access it remotely through my laptop.
I have tried uninstalling the graphics drivers and reinstalling them, I have gone into the bios and it up so the onboard is always on, I have even install windows 7 again but nothing works. I have also tried to erase the cmos.
If someone has gotten this isssue and fixed it please let me know how.
My build is;
i5 2500k
no discrete gpu
using onboard intel graphics 3000
8 gbs corsair ram at 1333ghz
60gb ocz agility 3 ssd
1tb western digital storage drive
600 w powercolor psu
So the vga monitor works, when just the dvi monitor is plugged in , there is no signal even during the post screen only reason i know its on is because i can access it remotely through my laptop.
I have tried uninstalling the graphics drivers and reinstalling them, I have gone into the bios and it up so the onboard is always on, I have even install windows 7 again but nothing works. I have also tried to erase the cmos.
If someone has gotten this isssue and fixed it please let me know how.
My build is;
i5 2500k
no discrete gpu
using onboard intel graphics 3000
8 gbs corsair ram at 1333ghz
60gb ocz agility 3 ssd
1tb western digital storage drive
600 w powercolor psu