Edimax undetected EthernetCable

Ishita_2

Prominent
May 15, 2017
1
0
510
My edimax router 6228ns v3 router was working fine even last week. Now whenever am trying to connect , it is connected at first for few minutes, then its showing "Ethernet cable is not properly connected" . I tried switching off the power then reconnect, again its connected for few minutes and showing the same message. Please help me out .
 
Solution
Verfy that all the plugs and connections are fully connected and snugly in place.

Are you using any ethernet wall outlets or adapters? Check everything you can between computer and router.

Make sure that your ethernet network adapter is securely in place - USB or PCIx card if you are using one or the other.

Try another known working ethernet cable.

Good chance that the existing cable has a problem - most likely the plug to wire connection on one end or the other.

Verfy that all the plugs and connections are fully connected and snugly in place.

Are you using any ethernet wall outlets or adapters? Check everything you can between computer and router.

Make sure that your ethernet network adapter is securely in place - USB or PCIx card if you are using one or the other.

Try another known working ethernet cable.

Good chance that the existing cable has a problem - most likely the plug to wire connection on one end or the other.

 
Solution