[SOLVED] enabling xpm causes computer to not boot properly/direct me to BIOS

[piepiepies]

I am having some issue enabling XMP on my new build.
My current build:
i9-10850K CPU,
Asus Prime Z490-A,
Corsair Vengeance LPX 2x8 16 GB CL16 3200 mhz.
Whenever I turn on XMP and go with the automated selections, my computer would be stuck on a boot loop. I have tried to set the timing values in accordance with what thaiphoon burner states, that did not work. The only luck I've had so far is when I turn the speed down to 3000 mhz.
Just looking for some possible solutions at this point now.
Thanks.

 

[sizzling]

Is the RAM in slots A2 & B2?

 

[piepiepies]

Is the RAM in slots A2 & B2?

No, it's in A1 and B1. The slots make a difference?

 

[sizzling]

No, it's in A1 and B1. The slots make a difference?

Yes, the motherboard instructions say A2 & B2 when running 2 dimms

 

[piepiepies]

Yes, the motherboard instructions say A2 & B2 when running 2 dimms

wow, thanks for that.