Hi,
I recently purchased a hard drive and to check its health I check the SMART attributes and it seems fine. Then I ran a SMART test and I got the following:
Since I didn't find information about the error "ABRT", I re-ran the test with the same error (actually the output of the second test is what you can read just above).
Anyone knows what is this? Is the disk in good shape?
Thanks
I recently purchased a hard drive and to check its health I check the SMART attributes and it seems fine. Then I ran a SMART test and I got the following:
Code:
Error 2 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 00 00 00 00 00 ff 3d+11:37:12.627 NOP [Abort queued commands]
b0 d4 00 82 4f c2 00 00 3d+11:36:11.653 SMART EXECUTE OFF-LINE IMMEDIATE
b0 d0 01 00 4f c2 00 00 3d+11:36:11.651 SMART READ DATA
ec 00 01 00 00 00 00 00 3d+11:36:11.641 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 3d+11:36:11.640 IDENTIFY DEVICE
Since I didn't find information about the error "ABRT", I re-ran the test with the same error (actually the output of the second test is what you can read just above).
Anyone knows what is this? Is the disk in good shape?
Thanks