I have started getting these errors after a short on my system which caused my GPU to die. But unplugging the GPU and starting to use the integrated graphics was enough to make my PC work. Then these errors on my disk D: (which is quite an old HDD) started popping up. I don't wanna lose any data before i can get a back-up of some of my important files. But it is not possible to do so for now.
Errors from the event viewer;
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: D:, DeviceName: \Device\HarddiskVolume5.
Failure status: A device which does not exist was specified.
Device GUID: {97bd8ec5-8a72-df74-efd5-b017d2c8ba81}
Device manufacturer:
Device model: ST1000DM003-1CH162
Device revision: CC49
Device serial number: Z1D87DAE
Bus type: SATA
-------------------
An error was detected on device \Device\Harddisk1\DR1 during a paging operation.
-----------------
I am not sure if this one is related to my problem but in the event log the time says it happened almost simulatenously with others;
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{2593F8B9-4EAF-457C-B68A-50F6B8EA6B54}
and APPID
{15C20B67-12E7-4BB6-92BB-7AFF07997402}
to the user DESKTOP-EENPFVC\vagab SID (S-1-5-21-473119719-283972727-3783877462-1001) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
-----------------------
Getting this ' A device which does not exist was specified. ' while trying to reach many of the folders on my hard drive D.
What can i do to troubleshoot the problem? Only thing i really want is to save my data without and risks, and possible don't kill my HDD since it is being used as an extra storage for me.
This is the hard drive that gives the error;
��
Errors from the event viewer;
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: D:, DeviceName: \Device\HarddiskVolume5.
Failure status: A device which does not exist was specified.
Device GUID: {97bd8ec5-8a72-df74-efd5-b017d2c8ba81}
Device manufacturer:
Device model: ST1000DM003-1CH162
Device revision: CC49
Device serial number: Z1D87DAE
Bus type: SATA
-------------------
An error was detected on device \Device\Harddisk1\DR1 during a paging operation.
-----------------
I am not sure if this one is related to my problem but in the event log the time says it happened almost simulatenously with others;
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{2593F8B9-4EAF-457C-B68A-50F6B8EA6B54}
and APPID
{15C20B67-12E7-4BB6-92BB-7AFF07997402}
to the user DESKTOP-EENPFVC\vagab SID (S-1-5-21-473119719-283972727-3783877462-1001) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
-----------------------
Getting this ' A device which does not exist was specified. ' while trying to reach many of the folders on my hard drive D.
What can i do to troubleshoot the problem? Only thing i really want is to save my data without and risks, and possible don't kill my HDD since it is being used as an extra storage for me.
This is the hard drive that gives the error;
��
Hard Disk Model | SEAGATE ST1000DM003 |
Disk Family | Barracuda 7200.12 |
Form Factor | 3.5" |