[SOLVED] Ethernet Controller has no driver but can't figure out which driver to download and from where

[mdibbs]

Hi there,

Windows 10 computer just got reimaged and an ethernet controller we were using is no longer working. We suspect that the driver for the ethernet controller is no longer installed. I am using a Dalsa Genie Nano GigE PoE camera connected to a power injector. When I go to Device Manager, the "Information" section for the Ethernet Controller has the following info: "Device PCI\VEN_1D6A&DEV_07B1&SUBSYS_104617AA&REV_02\4&a906b27&0&0009 requires further installation." I need to download the Ethernet network adapter driver (provided by the network adapter manufacturer) but I don't know what the manufacturer is and where to download the appropriate driver from. I have attached two images.
Thanks

https://imgur.com/59dxETA

https://imgur.com/G1r8pv7

 

[mdibbs]

Also, here is the hardware ID info:

https://imgur.com/5FrvNZn

 

[rgd1101]

what the model of the motherboard?

 

[mdibbs]

what the model of the motherboard?

It is Lenovo 1046

 

[mdibbs]

what the model of the motherboard?

I posted the first line of the hardware ID into the Microsoft Update Catalog and got this. Do you think I can download the first driver that comes up?
Thanks

 

[ex_bubblehead]

I posted the first line of the hardware ID into the Microsoft Update Catalog and got this. Do you think I can download the first driver that comes up?
Thanks

They're all the same file.

 

[TommyTwoTone66]

Vendor 1D6A is "Aquantia Corp" who make specialist networking equipment, maybe this PoE adapter is made by them?

They were bought out by Marvell in 2019, probably after your Lenovo Thinkcenter was made.

Device ID 07B1 is an "Aquantia AQC107 NBase-T/IEEE 802.3bz Ethernet Controller" which has some pretty crazy looking PoE injection features and gets included in some interesting products, including a few Lenovo Thinkcenters.

I think this page has the driver you're after:

https://www.marvell.com/support/downloads.html

Select "AQC107" as the part number and "Windows 10 64 Bit" (presumably) as the OS

 

[mdibbs]

Vendor 1D6A is "Aquantia Corp" who make specialist networking equipment, maybe this PoE adapter is made by them?

They were bought out by Marvell in 2019, probably after your Lenovo Thinkcenter was made.

Device ID 07B1 is an "Aquantia AQC107 NBase-T/IEEE 802.3bz Ethernet Controller" which has some pretty crazy looking PoE injection features and gets included in some interesting products, including a few Lenovo Thinkcenters.

I think this page has the driver you're after:

https://www.marvell.com/support/downloads.html

Select "AQC107" as the part number and "Windows 10 64 Bit" (presumably) as the OS

This worked, thanks so much!