marcellis22
Distinguished
- Oct 20, 2008
- 607
- 0
- 19,010
http://www.ubergizmo.com/2010/03/asus-express-gate-can-now-be-downloaded/
Get a real computer, no fix needed!
Get a real computer, no fix needed!
Pangolin727
Distinguished
- Jan 21, 2011
- 2
- 0
- 18,510
I have the same problem.
I have a real computer.
P7P55D-e LX 4.2GHz Quad I-7 875K 16GB@1600 4TB openSUSE 11.3/Windows7 Pro
Oh, did I forget my other machines ? (8 hyper-cores the Old School KVM Way since 2000) P4-3.4GHz 3GB each, 1 TB or more, each)
You need to GET A LIFE
I have a real computer.
P7P55D-e LX 4.2GHz Quad I-7 875K 16GB@1600 4TB openSUSE 11.3/Windows7 Pro
Oh, did I forget my other machines ? (8 hyper-cores the Old School KVM Way since 2000) P4-3.4GHz 3GB each, 1 TB or more, each)
You need to GET A LIFE
apache_lives
Splendid
- Dec 10, 2002
- 6,873
- 1
- 26,160
Pangolin727
Distinguished
- Jan 21, 2011
- 2
- 0
- 18,510
Please read prior messages before responding.
The question is How to Enable or Re-Install Expressgate when it is reports the ' Incomplete Installation ' error. It does not need to be disabled if it doesn't work.
Reading the manual is excellent advice. Please do so before rendering your expert opinion. The manual does not address the configuration issue or the loading of an updated ExpressGate.
Searching AsusTeK forums and Googling elsewhere shows many others are similarly at a loss. Expressgate apparently does not work with RAID, however it also doesn't work with IDE. So something else is involved. Getting updated Expressgate software via AsusTeK does not seem to work.
Constructive remedies or further problem definition would be nice.
The question is How to Enable or Re-Install Expressgate when it is reports the ' Incomplete Installation ' error. It does not need to be disabled if it doesn't work.
Reading the manual is excellent advice. Please do so before rendering your expert opinion. The manual does not address the configuration issue or the loading of an updated ExpressGate.
Searching AsusTeK forums and Googling elsewhere shows many others are similarly at a loss. Expressgate apparently does not work with RAID, however it also doesn't work with IDE. So something else is involved. Getting updated Expressgate software via AsusTeK does not seem to work.
Constructive remedies or further problem definition would be nice.
No solution here. ExpressGate worked fine with SATAs in IDE mode. After I created RAID5 - no more joy. I've installed / re-installed every version of ExpressGate I can find and still get the "installation incomplete" message. I don't think it likes RAIDs. If you find a solution, please post.
Asus ExpressGate is something that unless you know you want, is not at all important. So don't worry too much about it not working. What it is is a small OS that is intended to allow you to quickly boot your system to do things like check your email without waiting for the main OS to boot. Personally, I don't like it and always disable it.
No one has stated specifically, but I believe this is an error that comes up right after POST and not something from inside the OS. If that is the case, you just need to disable Expressgate in the BIOS. Just hit "delete" when the system first turns on to enter the BIOS, then navigate to the "Tools" tab. In that tab should be an option for Express Gate that you can set to Disabled. Here is a screenshot of that screen: https://d2fn9540hpidsu.cloudfront.net/gallery/full/bios_screenshots/Motherboard/Asus-P7P55-M-6513/105175.jpg . After that, just hit "F10" to save the setting and reboot.
That should clear up your problem. If you are getting a message in Windows, then go to "add and remove programs" in Control Panel and uninstall the Asus Express Gate program.
No one has stated specifically, but I believe this is an error that comes up right after POST and not something from inside the OS. If that is the case, you just need to disable Expressgate in the BIOS. Just hit "delete" when the system first turns on to enter the BIOS, then navigate to the "Tools" tab. In that tab should be an option for Express Gate that you can set to Disabled. Here is a screenshot of that screen: https://d2fn9540hpidsu.cloudfront.net/gallery/full/bios_screenshots/Motherboard/Asus-P7P55-M-6513/105175.jpg . After that, just hit "F10" to save the setting and reboot.
That should clear up your problem. If you are getting a message in Windows, then go to "add and remove programs" in Control Panel and uninstall the Asus Express Gate program.
- Nov 6, 2018
- 1
- 0
- 10
For me installing an older version worked ( on error L10300 - 8C000002 )
Here's the link from asus http://dlcdnet.asus.com/pub/ASUS/misc/utils/ExpressGate_V13132.zip
TRENDING THREADS
-
-
-
-
Question Need Advice - 140m Ethernet Run Between Buildings- Started by Reda_ELF
- Replies: 4
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 4K
Facebook
Twitter
Instagram