Fan controller with 6 slots

Solution
Yes, it will work. Power = Voltage * Current - that fan draws .18 Amps, so power is 12V*.18 = 2.16W. With two of them you're looking at 4.32 W which is well below the 12 W per channel.

I also have a fan controller and had to run the same calculation, though my fan controller is 30W per channel. I put 6 fans on 3 channels and left the last 3 unused. I've got one channel for 2X140mm fans for cpu radiator, 2X200mm case fans, and 2X120mm case fans. In my opinion, it's easier than manually turning down/up all 6 channels vs only having to manually change 3.
Yes, it will work. Power = Voltage * Current - that fan draws .18 Amps, so power is 12V*.18 = 2.16W. With two of them you're looking at 4.32 W which is well below the 12 W per channel.

I also have a fan controller and had to run the same calculation, though my fan controller is 30W per channel. I put 6 fans on 3 channels and left the last 3 unused. I've got one channel for 2X140mm fans for cpu radiator, 2X200mm case fans, and 2X120mm case fans. In my opinion, it's easier than manually turning down/up all 6 channels vs only having to manually change 3.
 
Solution


thanks for the response :bounce:
» Fan Control Channels6 (Max. 1 Ampere and max. 12 W per Channel)
This dosnt mean max 1 ampere on whole controller and max 12w per channel?


 
No - so the the max output is 12V, so 12V * 1A = 12W. So 1 Amp and 12 Watts are the same thing - it would be like saying "max. 1 foot and max. 12 inches". I think they do that because when looking at some fan specs, sometimes they give it in watts, and sometimes they give it in amperes.