Question Fan hub and Mother board Compatibility Issue

[XanderZapanta]

Hello, I bought DR2 PRO 3IN 1

I have an Asus Prime A320M-K as my motherboard which I think doesn't support aura sync.

My question is do I still have to connect the aura sync from the fan hub to my motherboard? Or is it necessary for me to connect my fan hub to my motherboard?

And if so, what do I use, the 3 pin or the VDG and where do I connect it in my a320mk?

Hope you can help me.

 

[Deleted member 362816]

Send me a link of the hub because even a google search doesn't know what a dr2 pro 3in 1 is.

 

[XanderZapanta]

Send me a link of the hub because even a google search doesn't know what a dr2 pro 3in 1 is.

https://www.google.com/url?sa=t&sou...cQFnoECBkQAQ&usg=AOvVaw29dUocFaJUslPrsbjAMrp2

Sorry for not including the full name of it

 

[Deleted member 362816]

3 pin ARGB header goes to the motherboard unless you plan to just use the remote to control the lights.

That being said that motherboard does not have a argb connector so you won't plug that cable in just have to use the remote.

 

[XanderZapanta]

3 pin ARGB header goes to the motherboard unless you plan to just use the remote to control the lights.

That being said that motherboard does not have a argb connector so you won't plug that cable in just have to use the remote.

Thank you for helping me.

To add to that, can you help suggest a budget AM4 motherboard that supports aura sync?

 

[Deleted member 362816]

Thank you for helping me.

To add to that, can you help suggest a budget AM4 motherboard that supports aura sync?

What is your budget? Are you in USA?

 

[XanderZapanta]

What is your budget? Are you in USA?

I'm from asia, specifically Philippines.

As of the moment, I have no budget cause I'm broke, I just wanted a suggestion that you think is bang for the buck for my build which is

Ryzen5 3500
2666mhz 16GB
Gigabyte RX580

Would love to do some overclocking aswell as I have an AIO which can help with the temps

 

[Deleted member 362816]

I'm from asia, specifically Philippines.

As of the moment, I have no budget cause I'm broke, I just wanted a suggestion that you think is bang for the buck for my build which is

Ryzen5 3500
2666mhz 16GB
Gigabyte RX580

Would love to do some overclocking aswell as I have an AIO which can help with the temps

Tbh it's not worth replacing the motherboard just to get a ARGB header. You are looking at around 100-150 USD.

 

[XanderZapanta]

Tbh it's not worth replacing the motherboard just to get a ARGB header. You are looking at around 100-150 USD.

I see, I would just use the provided remote controller for the fans

But for future upgrades, what motherboard shall I look into?

Thank you again for being so helpful.

 

[Paperdoc]

For future planning, that fan and lighting system can accept input from a mobo header of the newer 3-pin Addressable RGB (ADDR RGB, ARGB, Digital RGB) system, and NOT the simpler plain RGB 4-pin system.