Question Fan plugged into AIO is not spinning ?

[Complexic_1]

DeepCool LS320 120mm AIO 220w TDP 4th Gen Dual Chamber Pump
Z690 Pro RS - motherboard

The DeepCool has a cord that connects the pump to the board and another cord that connects to the fan. The fan it is connected to isn't spinning. I checked the BIOS but (tbh it's a little confusing) I only see, what I can only assume is, the pump's internal fan or something. It says 3000+, which as I am to understand is normal, but IF that is referring to the pump itself then where do I look to find the fan's setting and not the pump's setting if the fan is plugged into the pump?

The computer itself is working 100% fine and the other fan I have plugged into the MB is spinning just fine.

 

[Aeacus]

You need to connect the fan as shown on pages 20 and 21 in your AIO manual, and not as shown on pages 22 and 23.

So, read your AIO manual again and go over the fan/pump cable connections.

 

[helpstar]

did you connect sata power?

View: https://www.youtube.com/watch?v=JV9pkmAuslQ

 

[Aeacus]

did you connect sata power?

If SATA power would not be connected, AIO pump would not work, CPU would overheat fast and PC wouldn't work normally, like OP says it does.

So, best bet is that OP messed up the wiring, connecting only AIO pump (pages 22-23 in manual), rather than connecting fan + pump (pages 20-21 in manual).

 

[Complexic_1]

You need to connect the fan as shown on pages 20 and 21 in your AIO manual, and not as shown on pages 22 and 23.

So, read your AIO manual again and go over the fan/pump cable connections.

Thanks, I didn't realize that was 100% necessary. My last pump didn't need that many connections. 🤷‍♂️

 

[Aeacus]

My last pump didn't need that many connections. 🤷‍♂️

Every AIO is different, so do read the manual every time. Hence why there is manual included in the first place.