Question Find correct timings for GeiL EVO XII at 3200mhz

[elraffael]

Hi everyone, does anyone know how to find correct timings of a RAM memory? I have a GeiL EVO XII memory that was running in docp activated in the only profile that comes from the factory, which is 3600mhz. I recently installed an Asus RTX 4070 Ti Super TUF Gaming and it started giving me problems with green or white lines on screen.I tried several things but the only thing that worked was to activate docp and lower the frequency to 3200mhz, I did this because I remembered that when I activated the docp profile in the BIOS I got a warning saying that it could cause instability with PCIe 4.0 devices, such as the video card.I would like to know what the optimal timings would be for the 3200mhz, but I have no idea where to start. my setup is: motherboard asus x570 tuf gaming plus wifi - Ryzen 3600 -asus rtx 4070 ti super tuf gaming - ram GeiL EVO XII 3600mhz - power supply Corsair 750W 80 Plus Gold RM750X.

I would like to add that a time ago, PC self reboot in any time and only solution was set VDDCR SOC Voltage to manual in 1.0v.

 

[Lutfij]

Welcome to the forums, newcomer!

I recently installed an Asus RTX 4070 Ti Super TUF Gaming and it started giving me problems with green or white lines on screen.
Did you run DDU prior to dropping in the new GPU and then manually installing the latest GPU driver sourced from Nvidia's support site in an elevated command?

asus x570 tuf gaming plus wifi
What BIOS version are you on for your motherboard?

power supply Corsair 750W 80 Plus Gold RM750X
How old is your PSU and what did it power throughout it's tenure?

ram GeiL EVO XII 3600mhz
Got a link to the ram kit you're working with?

 

[elraffael]

Welcome to the forums, newcomer!

I recently installed an Asus RTX 4070 Ti Super TUF Gaming and it started giving me problems with green or white lines on screen.
Did you run DDU prior to dropping in the new GPU and then manually installing the latest GPU driver sourced from Nvidia's support site in an elevated command?

asus x570 tuf gaming plus wifi
What BIOS version are you on for your motherboard?

power supply Corsair 750W 80 Plus Gold RM750X
How old is your PSU and what did it power throughout it's tenure?

ram GeiL EVO XII 3600mhz
Got a link to the ram kit you're working with?

I have clean installed windows 11 24h2 version and latest Nvidia from official site. motherboard bios version is the latest 5021. power supply is from 2023 june. Ram model number: GAEXSY416GB3600C18BDC. https://geilmemory.com/product/?id=46

 

[Bob.B]

I have clean installed windows 11 24h2 version and latest Nvidia from official site. motherboard bios version is the latest 5021. power supply is from 2023 june. Ram sku: GAEXSY416GB3600C18BDC. https://geilmemory.com/product/?id=47

Your link points to intel ram.
Run a pass of cpu-z you can see the timing table.

 

[elraffael]

Your link points to intel ram.
Run a pass of cpu-z you can see the timing table.

it's the correct link: https://geilmemory.com/product/?id=46
thank you for responding. I would like to add that a time ago, PC self reboot any time and only solution was set VDDCR SOC Voltage to manual in 1.0v. I don't know if this has anything to do with it.