So as per the title I just completed my first build and on boot I get no vga signal...
Firstly, its odd because it powers on for a moment, stops, and then after a few seconds powers on again. Possibly normal but ive never seen it.
Also I get no indications, no beeps. The manual for the MB states beep sequences to diagnose the problem so I have idea whats happening.
Lights are on, GPU fans are spinning, screen is connected...
Any help with this would be greatly appreciated.
System
MB - ASUS P8P67 pro
CPU - i7 2600k
GPU's - 2x XFX 6970's xfire
Ram - 8gig ripjaws
One thing to point out, I forcibly removed one of the GPU's by mistake during the build. I didn't think it was enough to harm it but know im thinking this could be the root of the problem. If this were the case, would that mean the other GPU wouldn't be functional? Ive tested both and neither work.
Firstly, its odd because it powers on for a moment, stops, and then after a few seconds powers on again. Possibly normal but ive never seen it.
Also I get no indications, no beeps. The manual for the MB states beep sequences to diagnose the problem so I have idea whats happening.
Lights are on, GPU fans are spinning, screen is connected...
Any help with this would be greatly appreciated.
System
MB - ASUS P8P67 pro
CPU - i7 2600k
GPU's - 2x XFX 6970's xfire
Ram - 8gig ripjaws
One thing to point out, I forcibly removed one of the GPU's by mistake during the build. I didn't think it was enough to harm it but know im thinking this could be the root of the problem. If this were the case, would that mean the other GPU wouldn't be functional? Ive tested both and neither work.