Question First time AMD AM5 builder with 8 + 4 pin problem

[fflanaganus1]

Hello All
I am building a new rig for a friend using the AM5 platform and this and first build using the M-ATX build.
I am use to the 6 pin or 8 pin power supply on top of the board but not the 8+ 4 pin set up.
System info for reference;
Case Thermaltake AH T200 in racing green
Motherboard: ASUS B650M-Plus WIFI
Ram: Crucial Pro Series DDR5 32 gb (2 x16gb) 6000MT/s
CPU: AMD Ryzen9 7950X with graphic
Hard Drive: SSD Samsung 990 Pro 2TB
Graphic card: Gigabite 4070 Super
CPU Cooler: Thermalright Frozen Prim 240 all-in0one CPU liquid cooler
Power supply: Corsair RMx Series RM1000x 80 plus gold

My problem with this build is the 8+4 power input on the top of the mother board.
This power supply has a cable for the 8 pins but nothing for the other 4 pins.
So will it cause a problem if those 4 pins are not powered or
do I need to get a different power supply and if so which brand and model that
can work with this mother board 8+4 pin problem and has max length is 180MM?

This is my forth PC build but I have never encountered this problem before.
So any help would be grateful from the experts.

Thanks

 

[thestryker]

That power supply should come with two EPS12V cables for CPU power and both of them should be 4+4 cables which means you shouldn't have any problems.

 

[fflanaganus1]

That power supply should come with two EPS12V cables for CPU power and both of them should be 4+4 cables which means you shouldn't have any problems.

This power supply came with 3 6+2 cables; 2 8 pin cables; 4 SATA power cables; 2 Moller and the main power cord for the board but no 4+4 cables hint my question.
also this box was UN-open from Amazon.
Sorry to all I found my error the 8 pin were two 4+4 pins stuck together and it looked like I just had two 8 pin cables.
Again thank you for the help and sorry to bother you.