Foxconn N15235, 4gb installed(in cmos regocnized) 2,75 in Windows 7 64-Bit

[cm0scm0s]

Hello, I just made a built for my girlfriend after Asus destroyed my p5b Mobo with a corrupt bios flash file.

This mobo only has 2dimm slots but it supports 4 gb this is also recognized in the bios and in windows as 4bg , But only 2,75 is usable.

This bios does not have a memory remap function , Nor is my msconfig boot configured so it would lock up any ram.

I am searching desperatly for an awnser that could resolve my issue,

I'm looking for an awnser that could help me with this bios. is there perhaps another function wich is not named memory remap that could have the same function?

My specs are

e6600 on foxconn n15235
gt440
2x ddr2 ram 2gb pc2-6400 (kingston &trancend memory)

Anyhelp is welcome

 

[cm0scm0s]

ah i see, i tried to find the memory sharing but no succes, i needed to do a jumper reset back cmos checksum after trying the peg instead of vga,

so there isnt exactly a southbridge area in the bios so ill look one more time for the memory sharing before i send u the pics

 

[cm0scm0s]

These are the most relevant pages ,

the integrated pher. page only contains the lan and audio.
welcome to the foxcrack bios

 

[h3sham]

hmm check this article....i tried to understand it but ive been up since 730am and it 247am atm and im dead tired so i cant get a word of what it means xD
http://www.techarp.com/showFreeBOG.aspx?lang=0&bogno=332

 

[cm0scm0s]

interesting , u go to bed im also taking the hours late , im going to try peg one more time , previously i got bootlooped if it doesnt work im going to bed and continue the search for 4gb usable tomorrow 😛

thank you for all your help i apreciate it alot

 

[h3sham]

good luck then 😀

 

[cm0scm0s]

It has been set from AUTO to PEG, it boots windows , but still 4 Ram (2,75) Usable.
Perhaps something in Windows 7-64 bit can be edited to make it allocate 100% of the modules ,

Bios does nothing , but it shows 4, windows does nothing but it shows 4, it needs to USE 4!.

For everyone owning this mobo, return to sender!

 

[h3sham]

in the resources monitor does it say that the 1.75GB are hardware reserved?

 

[cm0scm0s]

1,20 something is hardware reserved

 

[h3sham]

ok since everything we tried doesnt work...throw the flying dutchman's mobo away and get a decent one

 

[h3sham]

but ffirst check this out it might help somehow

http://support.microsoft.com/kb/978610

its a last resort before you have to pay for another

 

[cm0scm0s]

hehehe nice try 😛 tnx anyway

oh well ill send this baby to the next dimention then,
any good cheap 775 mobo u know of for a conroe e6600 that can handle about 8 gb ram and has overclocking potentials?
my girlfriend really wants to join me on the BF3 bandwagon and after i totally nuked her (MY) asus p5b mobo with the corrupt bios flash and this wonderfull foxcrack board wont let me get more than 2,6 gb im going to need a new one,

by my experiance and troubleshooting bf3 online is unplayable with less than 6gb ram, unless u want the 1 second freezes ingame everytime u get in action.

 

[h3sham]

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131794

or

http://www.newegg.com/Product/Product.aspx?Item=N82E16813157242

 

[cm0scm0s]

2 modules of 4gb are way to expensive + a motherboard , i found a solution . ill buy sandybridge mobo 35 euro's asrock, intel celeron 2,4 ghz and 8 gb kingston and ill be 110 euros lighter , thats all. + the game that is .

 

[h3sham]

sounds like a good idea to me

 

[cm0scm0s]

any owners of this motherboard who've had succes with 4 gb?

 

[cm0scm0s]

Foxconn that is

 

[cm0scm0s]

Bump!

 

[cm0scm0s]

desperate bump -_-

 

[Frits van Leeuwen]

I've upgraded from 2G to 4G. I got some problems too. I think it's how fast are the memmory cimms. But I'm not sure jet.

 

[cm0scm0s]

I've upgraded from 2G to 4G. I got some problems too. I think it's how fast are the memmory cimms. But I'm not sure jet.

Hey the busspeed of the cpu is not built for +3gb ram, just throw it away its outdated garbage.