Front Panel Connector Problem

brianjay0914

Reputable
May 5, 2014
134
1
4,690
so i connect the front panel connectors into z97 gaming 5 motherboard .
i know its correct
but when i turn it on .
it suddenly smoke . smells like rubber . coming form the front panel board

so i immediately turn it off

does misconnection of positive and negative . lead to short circuit

or its just the chassis problem...


but I know it is connected properly
 
Solution
If your sure you were plugging the front panel connector into the right block there should be no big issue even if you connect them backwards. There is a on/off switch, a reset switch and LEDs. You are sure your plugging it in to the right block?


but is it possible to have short issue if I misconnect the pins in the mobo.
for intances like.
positive and negative of led misconnects . possitive to negatvie and negative to positive .

I got really scared when i saw it smoke.

so Its not my problem isn't
 
If your sure you were plugging the front panel connector into the right block there should be no big issue even if you connect them backwards. There is a on/off switch, a reset switch and LEDs. You are sure your plugging it in to the right block?
 
Solution


yes I am and Big thanks to you . CHASSIS IS THE PROBLEM