G.SKILL Trident Z 3200MHz CL14 overclocking?

[Profix]

Hello guys, i was wondering if anyone out there with a kit similar to mine, tried any overclocking options or tweaking tightnings.

Ram kit: G.Skill Trident Z 3200Mhz Cl14 ( 14-14-14-34 ) 1.350V 16GB

I would try push it up to arround 3400-3733mhz.

I was thinking about increasing voltage to 1.380-1.400 and try some higher frequensy (timings to get an higher frequenzy).

So if anyone out there have tried this type of KIT, and got any advice or a start point which i could attempt on going for. Cheers.

Probably going to try 1.40V with same timings and 3400mhz first.

-Cheers

 

[volkgren]

I don't see why you don't just increase timings to C16 and try 3600. That seems very reasonable. 1.4V might decrease the lifespan of the memory. Might not. But I'm sure that RAM was expensive.

 

[TechyInAZ]

According to research I've done 1.4v is fine for 24/7 usage. But do not go beyond 1.4v.

3600 seems reasonable. As said above, you might have to loosen timings to do so.

May I ask why you are overclocking your memory?

I've had my fair share of memory overclocking and it takes a ridiculous amount of time to increase performance noticeably.

 

[MeanMachine41]

G.Skill bin their modules carefully so it will probably be a frustrating exercise to get 3600MHz from a 3200MHz kit even with looser timings and 1.4V.

I have a 16GB (2x8) kit F4-3200C14D-16GTZR and using Thyphoon and Ryzen Dram Calculator, I could obtain stability using SAFE but FAST was unstable without going to CL15.

Good Luck if you can even get 3400MHz.

 

[Profix]

According to research I've done 1.4v is fine for 24/7 usage. But do not go beyond 1.4v.

3600 seems reasonable. As said above, you might have to loosen timings to do so.

May I ask why you are overclocking your memory?

I've had my fair share of memory overclocking and it takes a ridiculous amount of time to increase performance noticeably.

I'm not sure, why, i just like to see how good my hardware is and their limits. I did 3733mhz 1.4Volts andd 16-16-16-36 timings stable 2runs in memtest86 today. So i would say its allright imo.

 

[Profix]

G.Skill bin their modules carefully so it will probably be a frustrating exercise to get 3600MHz from a 3200MHz kit even with looser timings and 1.4V.

I have a 16GB (2x8) kit F4-3200C14D-16GTZR and using Thyphoon and Ryzen Dram Calculator, I could obtain stability using SAFE but FAST was unstable without going to CL15.

Good Luck if you can even get 3400MHz.

I did 3733mhz 1.4Volts andd 16-16-16-36 timings stable 2runs in memtest86 today. So i would say its allright imo.

 

[Profix]

I don't see why you don't just increase timings to C16 and try 3600. That seems very reasonable. 1.4V might decrease the lifespan of the memory. Might not. But I'm sure that RAM was expensive.

I did 3733mhz 1.4Volts andd 16-16-16-36 timings stable 2runs in memtest86 today. So i would say its allright imo

 

[drivinfast247]

Run Cinebench R15 a few times and also Prime95 Blend for an hour.

 

[Profix]

Run Cinebench R15 a few times and also Prime95 Blend for an hour.

Yeah will do that, my 8700k oc aswell with this kit im arround 1570-1580points consistant. Did 6runs, 30min in prime 95 atm still going strong

 

[drivinfast247]

Did you run it before the OC for a baseline reading? Just to make sure the increase in frequency and loose timings didn't end up at the same performance with higher voltages.

 

[TechyInAZ]

According to research I've done 1.4v is fine for 24/7 usage. But do not go beyond 1.4v.

3600 seems reasonable. As said above, you might have to loosen timings to do so.

May I ask why you are overclocking your memory?

I've had my fair share of memory overclocking and it takes a ridiculous amount of time to increase performance noticeably.

I'm not sure, why, i just like to see how good my hardware is and their limits. I did 3733mhz 1.4Volts andd 16-16-16-36 timings stable 2runs in memtest86 today. So i would say its allright imo.

Cool.

Just remember memtest86 will only give you a general estimate when it comes to stability. If you REALLY want to get stable memory, run prime95 with memory optimized settings.

I can give you those settings if you need them.

 

[Profix]

According to research I've done 1.4v is fine for 24/7 usage. But do not go beyond 1.4v.

3600 seems reasonable. As said above, you might have to loosen timings to do so.

May I ask why you are overclocking your memory?

I've had my fair share of memory overclocking and it takes a ridiculous amount of time to increase performance noticeably.

I'm not sure, why, i just like to see how good my hardware is and their limits. I did 3733mhz 1.4Volts andd 16-16-16-36 timings stable 2runs in memtest86 today. So i would say its allright imo.

Cool.

Just remember memtest86 will only give you a general estimate when it comes to stability. If you REALLY want to get stable memory, run prime95 with memory optimized settings.

I can give you those settings if you need them.

Yeah sure share !

 

[Profix]

Did you run it before the OC for a baseline reading? Just to make sure the increase in frequency and loose timings didn't end up at the same performance with higher voltages.

Yes i did !