GA-H67M-UD2H mobo doesn't detect my Kingston SSD

[Mac McCartney]

Difficulty getting my mobo to see my SSD drive
Mobo is a gigabyte GA-H67M-UD2H and 120 GB Kingston SSD bios doesn't seem to see the drive at all. It sees my old spinners but doesn't see the new drive at all..... Help!

 

[Dereck47]

Connect your SSD to port SATA3_0 if it is not there already. If it is already there then connect it to port SATA3_1. Also double-check that the port is on AHCI mode. See page 7 of your motherboard manual for the location of the ports.

 

[Mac McCartney]

Connect your SSD to port SATA3_0 if it is not there already. If it is already there then connect it to port SATA3_1. Also double-check that the port is on AHCI mode. See page 7 of your motherboard manual for the location of the ports.

Thank you Matey, I'll try this out when I get home later. 🙂

 

[Mac McCartney]

Thank you..... My SSD is now working fine and being recognised in bios and CMOS .... Didn't know it but the AHCI Was the missing bit I needed