Question Gigabyte argb connectors

[tonv]

Hello,
I am trying to connect argb connectors to my motherboard. It's a Gigabyte b550m Aorus elite rev 1.3. I am trying to connect my thermaltake pure duo 12 argb fans. The manual included in the fans says that I need to connect three pin

https://imgur.com/a/IyszjfC

to my motherboard. Well my motherboard doesn't have the exact 3 pin header rather It has the standard 5v argb header. Well I want to know If It's safe to connect the the other header

https://imgur.com/f6Z4CP6

to my motherboard. It says in the fan manual that this type of header is for msi and asus only. So my question is can I use the standard 5v 2+1 pin connector that is for asus/msi on my gigabyte motherboard?

https://imgur.com/EqxlaCU

https://imgur.com/4ZDOq4f

 

[Lutfij]

Well my motherboard doesn't have the exact 3 pin header rather It has the standard 5v argb header. Well I want to know If It's safe to connect the the other header
You'll need to connect to the D_LED headers located on the bottom left hand and top right hand corners of your motherboard, labelled D_LED1 and D_LED2. Make sure the 4pin connector from the fan is aligned with the missing row on both the board and the connector.

To corroborate that info;
https://download.gigabyte.com/FileL...231211.pdf?v=c928dfa8c11f1511e05e3c8c8184a1ed
turn to page 17 in the motherboard manual, the D_LED headers are 5V ARGB headers.

 

[tonv]

ight, thanks for the info. The argb is working perfectly now.