Today I installed a new aio, I've gone from a h105 to a h100x, pc booted fine before hand, unbolted the old cooler, bolted in New one and plugged her in, only for the leds to blink then instant shutoff, this would loop, I initially thought my 5 year old thermaltake 850w has had it, so I bought a 1000w corsair platinum rated, rebuild the whole pc ground up, only to turn it on and all the leds to blink and it turn off, sometimes it stays on for a bit with no post, my motherboard leds don't light up for 5 or so seconds wheres every other led is lit up, my gpu leds turn on and off like a strobe light and then it shuts down again. I've tried everything I can think of at this point, every cable is firmly plugged in, aio cables have been tried in multiple configurations, tried different ram, 1 stick, 2 sticks, tried no ram, tried no gpu, tried cmos, tried essentials start, I'm stumped, I am using conductive thermal paste however I've triple checked if it's spilled anywhere and it hasn't, I also have no bent pins as I've checked that 4 times plus the cpu wasn't removed in the process.
https://drive.google.com/file/d/104LZyfwvbUjiylCDxsvPTEkO2VuTc9Pi/view?usp=drivesdk
Any help at all is amazing.
Specs are
9700k
Aorus z390 elite
1080ti aorus
Hx1000 corsair
Corsair 32gbs 3200mhz
Corsair h100x
https://drive.google.com/file/d/104LZyfwvbUjiylCDxsvPTEkO2VuTc9Pi/view?usp=drivesdk
Any help at all is amazing.
Specs are
9700k
Aorus z390 elite
1080ti aorus
Hx1000 corsair
Corsair 32gbs 3200mhz
Corsair h100x