[SOLVED] Having issues. Not sure what’s wrong

[Baatop]

Computer not booting, only power cycling

This happened a week ago and I couldn’t get it to work using any responses.

Now, I switched out the mother board with a different one, a MSI B450-PRO. Right now I am bread boarding it and I got the same issue. When I turn it on it lights up then powers off. PSU game spins, CPU fan spins. The EZ-DEBUG light for the CPU comes on but it doesn’t get past that light. The ram doesn’t light up though and I’m just not sure. I tried the stuff I had did before. Moved the ram to the different channel and tried it with out the CPU in it. I also tried the ram in a different computer and switching out the CPU with a Ryzen 5 1400. I’m at a lost and don’t know what to do. I just want to get it working and idk what I’m doing wrong. Another thing is that when I turn the PSU on I don’t press the button on the top of my case but it try’s to boot. Idk if I wired it wrong but the front button on my case doesn’t turn it on, it just start when the cpu is turned on. Is it a bad PSU?

 

[Baatop]

Computer not booting, only power cycling

This happened a week ago and I couldn’t get it to work using any responses.

Now, I switched out the mother board with a different one, a MSI B450-PRO. Right now I am bread boarding it and I got the same issue. When I turn it on it lights up then powers off. PSU game spins, CPU fan spins. The EZ-DEBUG light for the CPU comes on but it doesn’t get past that light. The ram doesn’t light up though and I’m just not sure. I tried the stuff I had did before. Moved the ram to the different channel and tried it with out the CPU in it. I also tried the ram in a different computer and switching out the CPU with a Ryzen 5 1400. I’m at a lost and don’t know what to do. I just want to get it working and idk what I’m doing wrong. Another thing is that when I turn the PSU on I don’t press the button on the top of my case but it try’s to boot. Idk if I wired it wrong but the front button on my case doesn’t turn it on, it just start when the cpu is turned on. Is it a bad PSU?

Just switched out the PSU for a 650 PowerSpec. Still the same issue. CPU?

 

[puw2]

I have not checked your previous posts so i dont know if you've tried any of these steps but you should try to:
Clear CMOS
Reseat CPU
Check that all connectors are seated in correctly and properly pushed in.

 

[Baatop]

I finally got it! So the problem was that my bios wasn’t updated. I used the flash bios to update my bios and then just had to unplug and plug my gpu back in. Thank you though for the help!