Having trouble identifying what went wrong with my PC, lots of errors in event viewer

[Ardems]

Today around 5:30 while I was downstairs my computer ran into over 150 errors in the event viewer. As far as what happened I have no idea, but when I went to unlock my computer it was just a black screen where all I could see was my mouse. I moved the mouse around the screen until I could find where the password input was and put my password in. When I unlocked the computer it looked like I had a windows 98 type them with a gray taskbar and weird looking icons. I hit ctrl alt del and the screen was just black, the PC then went on to reboot itself. I have a .evtx but I don't know where to upload it. more than half of it is Kernel-EventTracing event id 0 and disk event id 11. I've looked all over for an explanation to this but can't seem to find one.

I'm running windows 8.1 with
- i5 3570k
- ASUS P8Z77-V PRO
- GTX 770 2GB
-16 gigs of corsair vengeance
- EVGA 750W G2 PSU
- Seagate Barracuda 7200 RPM HDD
- Corsair Nova 64 gig SSD (couple of years old)


EDIT: Here is the evtx

 

[scout_03]

strip the system to minimum parts remove the non os drive and the gpu also use only one ram module and try to boot dont forget to plug your monitor to the onboard video chipset .

 

[Ardems]

strip the system to minimum parts remove the non os drive and the gpu also use only one ram module and try to boot dont forget to plug your monitor to the onboard video chipset .

The PC is working just fine now, I'm just trying to identify what happened to make sure that it doesn't happen again.

 

[scout_03]

did you made the test on it start to work without it .

 

[Ardems]

did you made the test on it start to work without it .

The PC still boots fine stripped down without my secondary HDD and GPU.

 

[scout_03]

add the hdd then try after do the same with the gpu without the hdd connect .

 

[Ardems]

add the hdd then try after do the same with the gpu without the hdd connect .

Still works, I added a download for the event viewer listings of the errors that occurred in my original post.

 

[scout_03]

most of the error are report from a disk could be your ssd check it with the corsair ssd tollbox http://www.corsair.com/en-ca/support/faqs/solid-state-drives and for the hdd use the seagate seatools . adding this the ssd have a 3 years warranty .

 

[Ardems]

most of the error are report from a disk could be your ssd check it with the corsair ssd tollbox http://www.corsair.com/en-ca/support/faqs/solid-state-drives and for the hdd use the seagate seatools . adding this the ssd have a 3 years warranty .

My status on the tool says that the SSD is OK, and the HDD isn't doing that well, but I'm going to buy two SSDs in a month or two to replace what I have. The drive 0 being referenced in the event viewer is my SSD. I just installed a new PSU the other day, could that be causing an issue in any way? Also what is the C:\WINDOWS\System32\LogFiles\WMI\LwtNetLog.etl being referenced in everything?

 

[scout_03]

if that psu is the same power or more powerfull then the previous one i dont think it is the one you could to clear that even log and try your ssd with another sata cable on it and see if it report error again .

 

[Ardems]

if that psu is the same power or more powerfull then the previous one i dont think it is the one you could to clear that even log and try your ssd with another sata cable on it and see if it report error again .

Yea the PSU is the same wattage and working fine, but what is the C:\WINDOWS\System32\LogFiles\WMI\LwtNetLog.etl thing that shows up everywhere.

 

[scout_03]

you dont need to erase this files just clear the event log .