Question HDD is at 100% freezing my PC.

[ToddeSwe]

Hi!

One of my 3 HDD is behaving strange since i updated my Win 10 a couple of versions back.

Have tried guides to remove this but i fail. So now i'm asking you and posting a log from my PC.

Can someone see what this meens?

Loggnamn: System
Källa: amd_sata
Datum: 2019-12-13 11:48:32
Händelse-ID: 129
Aktivitetskategori:Ingen
Nivå: Varning
Nyckelord: Klassiskt
Användare: Saknas
Dator: Todde
Beskrivning:
Återställning till enheten \Device\RaidPort2 utfärdades.
Händelsens XML-data:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="amd_sata" />
<EventID Qualifiers="32772">129</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2019-12-13T10:48:32.511870700Z" />
<EventRecordID>13699</EventRecordID>
<Channel>System</Channel>
<Computer>Todde</Computer>
<Security />
</System>
<EventData>
<Data>\Device\RaidPort2</Data>
<Binary>0F001800010000000000000081000480010000000000000000000000000000000000000000000000000000000000000000000000810004800000000000000000</Binary>
</EventData>
</Event>

 

[Fix_that_Glitch]

What power setting are you using in windows? And in your bios settings are you using power management?

 

[SkyNetRising]

One of my 3 HDD is behaving strange since i updated my Win 10 a couple of versions back.

Can you show screenshot from HDtune health?

 

[Fix_that_Glitch]

Also are you using intel rapid storage?

 

[ToddeSwe]

What power setting are you using in windows? And in your bios settings are you using power management?

In windows i use high performance and in BIOS i think i'm not using it because i don't like it.

 

[ToddeSwe]

Can you show screenshot from HDtune health?

Wich one of the test do you want to see? Or just the tab health?

 

[ToddeSwe]

Also are you using intel rapid storage?

I don't know what that is 🙁

 

[ToddeSwe]

Can you show screenshot from HDtune health?

https://www.dropbox.com/s/pek0y2fwbvd7vzj/13-december-2019_16-31.png?dl=0

 

[SkyNetRising]

Interface CRC errors - this could be because of bad sata cable or overheating of HDD or sata controller.

 

[captaincharisma]

i would download a tool like crystal disk info to check the drives health. is this drive you boot from?

 

[Ralston18]

Update your post to include full system hardware specs.

Are you using a RAID configuration? I see "RaidPort 2" in the log.

 

[ToddeSwe]

Interface CRC errors - this could be because of bad sata cable or overheating of HDD or sata controller.

While i was changeing the cable to this drive i discovered that this was a very old UDMA drive with jumpers limiting it to use just half speed. This drive was just attached to move old stuff around and then i was thinking of throw it away. BUT a seperation came in between. I just forgot about this small 500 GB drive.

I've now removed the jumper, and tomorrow i will buy a 1GB to replace this one. Let's take it from there.

 

[ToddeSwe]

i would download a tool like crystal disk info to check the drives health. is this drive you boot from?

No my boot drive is a new SSD Samsung 860 EVO 250GB. See my answer to the guy above this answer.

 

[ToddeSwe]

Update your post to include full system hardware specs.

Are you using a RAID configuration? I see "RaidPort 2" in the log.

No i do not and now i'm thinking i've done something wrong when i attached all my drives. I will investigate this tomorrow. I will be back with the result.

 

[ToddeSwe]

I am so a shame!

I looked at the manual to check that everything was connected as it should.
Discovered that i had put my boot disc in a wrong port.
I have 2 ports for SATA that as i understand are supposed to be used for the boot disc.
And i can imagine that the raid error thingy was due to this...

The computer starts 2-3 times faster than before so i guess i have found the problem.