Well, there can be 2 scenarios:
- Your Drive is attached, but undetected or unreadable.
There might be chances that your drive is having an unsupported file system or it may have bad sectors.
In this scenario,
- Right click on “This PC”, select Manage.
- Then, in the dialogue box that opens, Select Disk Management from the left side panel (last option).
There, look below the white portion, you will find a representation of the Disks connected. If it is shown in there.
- Right Click on your SSD, Format the drive and assign a drive letter to it.
Then wait a few seconds and it will be shown in the Drives panel.
- Your drive may not attached properly.
Check your connections in this case. When shown in Disk Management, follow the above procedure.