[HELP!] Case h700i Front Panels

[hashirama809]

My motherboard does not have these pins for the front panel like in the picture below.

What should I do? My case is h700i and my motherboard Asus z170-a. Thank you!

 

[julienruc]

There is no picture.

 

[hashirama809]

I'm sorry, here's the link so you can see it.

https://imgur.com/88VDJbF

 

[racksmith101]

That's your front panel usb2 connector.

 

[hashirama809]

So is that the cable used for the power SW, Reset SW, Power LED, HDD LED and all of that? By just connecting it into the USB 2.0?

 

[julienruc]

No wrong cable man, those ones are for the caze buttonzs, light, reset button, power button. You will have a large blue connector for USB 3.0 and a standard connect that needs to be connected to the USB 2.0 ports om your Motherboard.

I suggest you pull out the guidebook on your Motherboard, it will show you exactly where to connect what

 

[hashirama809]

Yes, I know about the USB 3.0 connector. The thing is that my case h700i has the cables for the case buttons but it isn't attached to anything as if I needed some kind of adapter from the case in order to plug the case bottons to my motherboard, but I don't see any. I'm just so confused.

 

[julienruc]

I highly doubt it, most cases and motherboards are standardized these days. Can you take a picture of all your case connectors? Please make any writting visible. Also add your case and motherboard model