Question Help getting a signal to my new projector

[axlrose]

Just replaced our 5050ub that we lost in a storm with a new 5050ub. Everything is connected the way it always has been. I can't seem to remember how to get a signal to it to watch tv and blurays etc. Am I missing something basic? HDMI is plugged in and I was able to use the keystone and zoom and all that to get it to mostly fit the screen, but I get no signal on both HDMI's.

Thanks.

 

[Lutfij]

replaced our 5050ub that we lost in a storm
You might want to clarify if it was a lightning strike. If so, then it's likely that more things got knocked out beyond your projector.

Am I missing something basic
You might want to pass on a picture of what your back end for the projector looks like after being hooked up. Speaking of hooking up, I noticed you have some info mentioned in your sig space specs. You're advised to include your specs in the thread's body since sig space specs can and will change over time. If and when that happens, this thread and it's relevant suggestions are moot to the end user in the same boat as you're in now.

That being said, please mention your display output/source that's tethered to the projector. On a side note, you should have it hooked up to HDMI 1.