My specs are:
Processor: i7 9700k
Motherboard: MSI Z390- A Pro
RAM: Corsair vengeance lpx 16gb DDR4 3000MHz
Cooler: Cooler master hyper 212 black edition
Power supply: Corsair CX750M
480gb SSD
2tb HDD
No GPU just yet
The problem is that the computer keeps restarting when it tries to boot windows. It powers up for around 5 seconds, everything turns on (fans, mouse, keyboard, lights) then restarts. However it stays on constantly during the BIOS. Windows was installed using USB, it did the pre setup wizard but just after the language set up for installation the problem with restarting occurred.
The cables connected to the motherboard from the power supply are; 24 pin, 8 pin cpu_pwr_1 1, 6pin pcie, SATAs and fans, they are definitely connected correctly.
I've tried connecting my friends SSD (already has windows installed) to my computer but the problem persists indicating that it's possible a hardware issue rather than a windows issue.
All the parts are brand new out of the box today, also as this is my first time building a pc I've just been following instructions as best as I can.
Any help/suggestions would be greatly appreciated as I cant find a away to keep my pc on installing windows.
Processor: i7 9700k
Motherboard: MSI Z390- A Pro
RAM: Corsair vengeance lpx 16gb DDR4 3000MHz
Cooler: Cooler master hyper 212 black edition
Power supply: Corsair CX750M
480gb SSD
2tb HDD
No GPU just yet
The problem is that the computer keeps restarting when it tries to boot windows. It powers up for around 5 seconds, everything turns on (fans, mouse, keyboard, lights) then restarts. However it stays on constantly during the BIOS. Windows was installed using USB, it did the pre setup wizard but just after the language set up for installation the problem with restarting occurred.
The cables connected to the motherboard from the power supply are; 24 pin, 8 pin cpu_pwr_1 1, 6pin pcie, SATAs and fans, they are definitely connected correctly.
I've tried connecting my friends SSD (already has windows installed) to my computer but the problem persists indicating that it's possible a hardware issue rather than a windows issue.
All the parts are brand new out of the box today, also as this is my first time building a pc I've just been following instructions as best as I can.
Any help/suggestions would be greatly appreciated as I cant find a away to keep my pc on installing windows.