- Dec 1, 2019
- 28
- 2
- 4,535
I'm getting this incompatibility issue on pc part picker:
The Gigabyte Z390 AORUS ELITE ATX LGA1151 Motherboard has an additional 4-pin ATX power connector but the Corsair Builder 600 W 80+ Bronze Certified ATX Power Supply does not. This connector is used to supply additional 12V current to the motherboard. While the system will likely still run without it, higher current demands such as extreme overclocking or large video card current draws may require it.
I plan on overclocking my ram a bit using xmp, and I might overlock my cpu in the future though I heard it's not worth doing on the i5 9600k.
extra details that might be useful:
I have a cx 600 psu
1060 6gb
sabent rocket 1tb nvme
Is it ok to slightly overclock my ram with this incompatibility issue?
The Gigabyte Z390 AORUS ELITE ATX LGA1151 Motherboard has an additional 4-pin ATX power connector but the Corsair Builder 600 W 80+ Bronze Certified ATX Power Supply does not. This connector is used to supply additional 12V current to the motherboard. While the system will likely still run without it, higher current demands such as extreme overclocking or large video card current draws may require it.
I plan on overclocking my ram a bit using xmp, and I might overlock my cpu in the future though I heard it's not worth doing on the i5 9600k.
extra details that might be useful:
I have a cx 600 psu
1060 6gb
sabent rocket 1tb nvme
Is it ok to slightly overclock my ram with this incompatibility issue?
Facebook
Twitter
Instagram