Every time I start up my pc it rockets off to a high temperature (80-100), I check bios and it’s says n/a to my sys_fan2 which is the header I connected my aio pump too, I spend some time replugging in the wire that’s connected to the header restarting and then it will work again this has become more and more annoying because i used to only need to re-plug it in once but now it requires more replugging in and restarting.
Idk if this is the pump but it works fine after I replugging it in and restarting.
I have done a bit of research and as a last measure I’m writing this which I’ll be posting in many forums to see if I can get any assistance or advice to fix it or help with it.
Pc Specs: Motherboard: Gigabyte Z390 Gaming X Cpu: i7-9700k Cpu Cooler: Coolermaster Master Liquid AIO ML360R Psu: Corsair CX550M 550w 80+ Semi-Modular
Thanks in advance for reading this and trying to help
Idk if this is the pump but it works fine after I replugging it in and restarting.
I have done a bit of research and as a last measure I’m writing this which I’ll be posting in many forums to see if I can get any assistance or advice to fix it or help with it.
Pc Specs: Motherboard: Gigabyte Z390 Gaming X Cpu: i7-9700k Cpu Cooler: Coolermaster Master Liquid AIO ML360R Psu: Corsair CX550M 550w 80+ Semi-Modular
Thanks in advance for reading this and trying to help