Hi,
I was wondering how far I can push my new ram. Its said to run normally at 3200mhz but was running at 2666 instead, so I overclocked it to 3200Mhz and Put the voltage up to 1.25 volts because for some reason it was on 1.15 or something. Here is my RAM PNY XLR8 RGB 32GB (2x 16GB) DDR4 3200MHz Memory - MD32GK2D4320016XRGB | Mwave.com.au Its rated as low power ram (1.35v) so is it safe to put it to 1.35v or should I put it to 1.32v just to be safe? It also says it supports a max frequency of 3200 but my motherboard will let me put it up to 6000mhz if I wish, if I put it to say 4000mhz will my system crash and i'll have to reset my cmos or worse?.. My mb is a refurbished MSI GAMING PLUS MAX X470 for reference
I was wondering how far I can push my new ram. Its said to run normally at 3200mhz but was running at 2666 instead, so I overclocked it to 3200Mhz and Put the voltage up to 1.25 volts because for some reason it was on 1.15 or something. Here is my RAM PNY XLR8 RGB 32GB (2x 16GB) DDR4 3200MHz Memory - MD32GK2D4320016XRGB | Mwave.com.au Its rated as low power ram (1.35v) so is it safe to put it to 1.35v or should I put it to 1.32v just to be safe? It also says it supports a max frequency of 3200 but my motherboard will let me put it up to 6000mhz if I wish, if I put it to say 4000mhz will my system crash and i'll have to reset my cmos or worse?.. My mb is a refurbished MSI GAMING PLUS MAX X470 for reference