How to assign Manual IP Address For Lan PCs connected To Router

[Muzamilismail]

Hello ,
Respected members i have a question how can i assign manual ip address to pcs connected to router using lan. Also i want to allow specific mac addresses. If anyone else connects expect allowed list then internet should not work on their devices.
Help me please.

 

[TechyInAZ]

http://portforward.com/networking/static-ip-windows-8.htm

Follow this guide.

 

[boosted1g]

You can assign IPs 1 of two ways:
Assign them at each individual computer. You will go to the network adapter settings, and under IPv4 you will hit properties and then you can set the IP address. Your router has a function to provide addresses using what is called a DHCP server, you can go into the config page and turn this off, or edit the dhcp server address range to a smaller number and make your PCs an IP that is not in that range. So say your router is IP 192.168.1.1 and your DHCP server range is now 192.168.1.150-192.168.1.254 then you would set your PCs with IPs that are between 192.168.2-192.168.149.

The other way is doing it at the router, not all routers have this feature (now all upgraded router firmwares like DD-WRT and tomato do. Each router/firmware has a different way of doing but from in the router config page you can associate an IP address to a specific MAC address and then your router will assign it that IP everytime. In this case you would assign the IP to an address that IS INSIDE the DHCP server range (vs the first method where you use an address outisde the server range).
I use this method at home because I want static IPs but dont want to have to change settings on mobile devices everytime I want to use a different wifi connection when I am not at home.

 

[Muzamilismail]

Thank you Techy Inaz but this shows only how to setup ip address in computers adapters,but i want to know how to manually assign ip address through router to devices i want and others devices should not work.

 

[kanewolf]

What router and firmware do you have? That type of functionality is very dependent on the firmware installed on the router.

 

[Muzamilismail]

What router and firmware do you have? That type of functionality is very dependent on the firmware installed on the router.

The model is an 1020-25u , it is provided by my isp names PTCL. The default firmware is installed on it.

 

[aylafan]

What router and firmware do you have? That type of functionality is very dependent on the firmware installed on the router.

The model is an 1020-25u , it is provided by my isp names PTCL. The default firmware is installed on it.

Like what previous people have said... unless you have a page on the router that says something like "DHCP Reservation List" where you can assign an IP address to a MAC address... you're out of luck and have to do it manually on each device. Not many people have your router model to know if this option is on your router or not.

 

[Muzamilismail]

What router and firmware do you have? That type of functionality is very dependent on the firmware installed on the router.

The model is an 1020-25u , it is provided by my isp names PTCL. The default firmware is installed on it.

Like what previous people have said... unless you have a page on the router that says something like "DHCP Reservation List" where you can assign an IP address to a MAC address... you're out of luck and have to do it manually on each device. Not many people have your router model to know if this option is on your router or not.

Please tell me does any option listed in this picture will work for me..

Url of Dhcp modem page

 

[aylafan]

What router and firmware do you have? That type of functionality is very dependent on the firmware installed on the router.

The model is an 1020-25u , it is provided by my isp names PTCL. The default firmware is installed on it.

Like what previous people have said... unless you have a page on the router that says something like "DHCP Reservation List" where you can assign an IP address to a MAC address... you're out of luck and have to do it manually on each device. Not many people have your router model to know if this option is on your router or not.

Please tell me does any option listed in this picture will work for me..

Url of Dhcp modem page

Try "Static IP Lease List" in that photo. Add entries. I'm not sure, but it doesn't hurt to try.