G
Guest
Guest
Hi all,
I own a mother board Abit BX 6 with a Intel P2 secc2 350 on it.
On the Soft menu 2 of the board, a technician setup my cpu 350 with the following setting:
233 (66)
Turbo = Off
Cpu power supply = Dpu default
Core voltage to 2.00v
Is it ok?
If you have the time to explain me what are these setting?
Another one if you have the time:
I heard that I could put a Pentium III
800MHz 256KB L2 Cache 100MHz FSB Slot1 SECC2 on it.
What could be the best setting for that 800 mhz speed?
Do you think that the abit will go too heat with that.
Do I ll feel the difference??? I make some 2d-3d graphic in my spare time. But I always remember couple years ago, I had upgraded from 133 to 200mmx and...I didn t saw a big difference in my application.
Now, do this upgrade worth spending some money for that.
What do you think about that
Thanks in advance!!!
Sorry for my poor english-
Vracky
I own a mother board Abit BX 6 with a Intel P2 secc2 350 on it.
On the Soft menu 2 of the board, a technician setup my cpu 350 with the following setting:
233 (66)
Turbo = Off
Cpu power supply = Dpu default
Core voltage to 2.00v
Is it ok?
If you have the time to explain me what are these setting?
Another one if you have the time:
I heard that I could put a Pentium III
800MHz 256KB L2 Cache 100MHz FSB Slot1 SECC2 on it.
What could be the best setting for that 800 mhz speed?
Do you think that the abit will go too heat with that.
Do I ll feel the difference??? I make some 2d-3d graphic in my spare time. But I always remember couple years ago, I had upgraded from 133 to 200mmx and...I didn t saw a big difference in my application.
Now, do this upgrade worth spending some money for that.
What do you think about that
Thanks in advance!!!
Sorry for my poor english-
Vracky