Ive got power just wont boot up. On the controls at the top it has the Quick Play DVD lights in blue lit along with the Blue Control lights across the top are all lit up. But, I hear no fan at all. I have put in a music CD and I see the green light flashing warning that it is opening.
I also hear that the CD seems to be about to start up and then sort of sounds like it gets stuck. Sort of a click click STOP sound if that makes any sense or helps at all.
Ive tried the power up, the battery only, battery out, holding the power switch down for 40 seconds so far. Ive not tried to disconnect any cables since Im not sure where those would be located on the computer.
What I have with the 9600 are THREE SCREW DOWN COMPARTMENTS and One Battery Hatch. Behind two seem to be the two hard drives. Behind one is are one piggy back small board looks like attached to the mother board and a set of boards one connected to the one below and the one below attached to the mother board. There is also the NICAD battery disc back up battery. So, thats all I see accessable easily.
There are of course other screws that might allow me to remove the entire back from the computer.
Any help on this would be greatly appreciated.
Sincerely,
Dave Johnson
I also hear that the CD seems to be about to start up and then sort of sounds like it gets stuck. Sort of a click click STOP sound if that makes any sense or helps at all.
Ive tried the power up, the battery only, battery out, holding the power switch down for 40 seconds so far. Ive not tried to disconnect any cables since Im not sure where those would be located on the computer.
What I have with the 9600 are THREE SCREW DOWN COMPARTMENTS and One Battery Hatch. Behind two seem to be the two hard drives. Behind one is are one piggy back small board looks like attached to the mother board and a set of boards one connected to the one below and the one below attached to the mother board. There is also the NICAD battery disc back up battery. So, thats all I see accessable easily.
There are of course other screws that might allow me to remove the entire back from the computer.
Any help on this would be greatly appreciated.
Sincerely,
Dave Johnson