I builty my new pc and every component turned on but my graphics card didnt turn on `

[berkaykaran]

So i recently built my new computer and every component turned on but my graphics card didnt. The white LED above the power cable turned on and I made sure that they were connected to the PSU
Here is the list of components:
-Intel core i7 6900k
Asus Rog Rampage 5 edition 10
32 GB of ddr4 3200mhz ram
1 Gtx 1080
1 Gtx 1080 OC edition
samsung m.2 nvme SSD 512 GB
and a Corsair hx1200 PSU
Any help would be appreciated have a nice day

 

[alexoiu]

Right click, select format and pick FAT 32 http://cdn.solveyourtech.com/wp-content/uploads/2014/07/format-usb-flash-drive-fat32-4.jpg

 

[alexoiu]

Still 76? Weird. And what code with graphics card installed?

 

[berkaykaran]

Still 76? Weird. And what code with graphics card installed?

I changed it from FAT to FAT 32 still 76
and should i install a grpahic card to test that?

 

[alexoiu]

Did the Flashback work (LED flashed for more than 10 seconds)?

 

[berkaykaran]

Did the Flashback work (LED flashed for more than 10 seconds)?

no i dont think so

 

[alexoiu]

Have you followed all steps above? You can also look for related videos on youtube if helping.

 

[berkaykaran]

Have you followed all steps above? You can also look for related videos on youtube if helping.

I am almost sure i did

 

[alexoiu]

No other idea, then, unfortunately...

 

[berkaykaran]

No other idea, then, unfortunately...

Its weird when i first built it the gpus were working but the rams werent working so i made the rams work and now the gpus doesnt work

 

[berkaykaran]

No other idea, then, unfortunately...

I put everything back together and this number poped up
https://imgur.com/a/tNvD6

 

[alexoiu]

Then it's a step forward. Now install the graphics card and connect all required power cables to it.

 

[berkaykaran]

Then it's a step forward. Now install the graphics card and connect all required power cables to it.

still the same :/

 

[alexoiu]

Then the graphics card does not work. Have you connected the PCIe power cables to it?

 

[berkaykaran]

Then the graphics card does not work. Have you connected the PCIe power cables to it?

Yeah I did i even tested something:
When i connected the power cables there was a white LED turning on above the 6+2 pin on the graphic card when i turned the system on and when i took them off the LED turned red

 

[alexoiu]

Try testing different PCIe slot. See if still the d6 code.

 

[berkaykaran]

Try testing different PCIe slot. See if still the d6 code.

One of the cards started working and the code is 76

 

[alexoiu]

I suggest testing with single card, not with both installed. Keep it simple, when testing.

 

[berkaykaran]

I suggest testing with single card, not with both installed. Keep it simple, when testing.

I putted one card only now there is nothing displayed on my test monitor the code is 82

 

[alexoiu]

Same if moving the card to different PCIe slot?

 

[berkaykaran]

Same if moving the card to different PCIe slot?

Alright i fixed the porblem kinda. The gpus are turning on but nothing displayed on the monitor rip
For some reason the gpus doesnt power up when i put them on the PCIE slot 1 and 3 but works on 2 and 4 which is incovinent because all of the front panel controls are blocked by the card

 

[alexoiu]

No other idea, unfortunately. Check http://www.tomshardware.co.uk/forum/261145-31-perform-steps-posting-post-boot-video-problems and see if helping.