Question I just got 9800x3d and its running at 95 c

Toggle sidebar Toggle sidebar
B

Bayareagoat415

Feb 19, 2025
19
0
10
IMG-2229.jpg
Like title say i bought 9800x3d paired with a z73 aio i had for like 3 years i hooked everything up cpu was fine 1 day later its running hot plus fps went down to half i reapplied thermal paste and everything is still cooking pls help
 
Last edited by a moderator:
Sort by date Sort by votes
Welcome to the forums, newcomer!

What BIOS version are you on for your motherboard? As for the AIO, you might want to know that the Z series of AIO's from NZXT were all horrible...and even the one's that MSI had, the one's that have/had the pump in the radiator instead of the CPU cooling block.

Make and model of your case and the orientation of the AIO with regards to the case?

Perhaps give this thread a read;

[SOLVED] - NZXT Kraken Z73 Pump Not Working

Hello everyone, Recently I decided to upgrade my Thermaltake Water 3.0 240 CL-W233-PL12SW-B Water Cooler to a NZXT Kraken Z73 series Water Cooler. I should also add that I purchased Thermaltake Riing Quad 12 RGB radiator fans to replace the NZXT OEM fans. After installation, when I booted my...
forums.tomshardware.com forums.tomshardware.com

Moved thread to Cooling section from CPUs section.
 
Last edited:
Upvote 0 Downvote
Bayareagoat415 said:
Like title say i bought 9800x3d paired with a z73 aio i had for like 3 years i hooked everything up cpu was fine 1 day later its running hot plus fps went down to half i reapplied thermal paste and everything is still cooking pls help
Click to expand...
You have PPT set to 1000W and the package is drawing 140w on a 120W tdp cpu.
Put your bios on default and if it has these settings as default turn them down.
Best would be if you could show all bios screens that handle cpu settings.
 
Upvote 0 Downvote
TerryLaze said:
You have PPT set to 1000W and the package is drawing 140w on a 120W tdp cpu.
Put your bios on default and if it has these settings as default turn them down.
Best would be if you could show all bios screens that handle cpu settings.
Click to expand...
I reset all bios setting to default yesterday still nothing it has to be my aio or the pump not tpuching the cpu but i doubt that what should i show of bios
 
Upvote 0 Downvote
Bayareagoat415 said:
I reset all bios setting to default yesterday still nothing it has to be my aio or the pump not tpuching the cpu but i doubt that what should i show of bios
Click to expand...
If the bios default is to have ppt at 1000w then it's overclocking your CPU and that's why it's getting hot, from the little that I know the settings are still safe-ish, vsoc (which causes ryzen to blow up) is low enough to not cause issues and temp limit is at 95 which is the official max.

Go into bios and if you don't know what to show at least show the starting page so that people can tell you where to go and what to show.
It should be under advanced settings but then it could be called a lot of different things.
 
Upvote 0 Downvote
TerryLaze said:
IMG-2244.jpg
You have PPT set to 1000W and the package is drawing 140w on a 120W tdp cpu.
Put your bios on default and if it has these settings as default turn them down.
Best would be if you could show all bios screens that handle cpu settings.
Click to expand...
TerryLaze said:
If the bios default is to have ppt at 1000w then it's overclocking your CPU and that's why it's getting hot, from the little that I know the settings are still safe-ish, vsoc (which causes ryzen to blow up) is low enough to not cause issues and temp limit is at 95 which is the official max.

Go into bios and if you don't know what to show at least show the starting page so that people can tell you where to go and what to show.
It should be under advanced settings but then it could be called a lot of different things.
Click to expand...
Ok thanks
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom