Question I need help please

[Gmsc46]

Hey everyone, this morning I enabled XMP - then I restarted my pc and Just it Just dont show any display anymore - neither recognizes my keyboard and mouse. I've tryed to reset bios but nothing worked so far. Could anybody help me, please?

Motherboard: gigabyte a320m s2h.

 

[sizzling]

Resetting the BIOS should work. How exactly did you do this?

 

[Gmsc46]

Resetting the BIOS should work. How exactly did you do this?

I acess my motherboard bios and enabled it there. I've tryed to reset but it didnt work

 

[sizzling]

I acess my motherboard bios and enabled it there. I've tryed to reset but it didnt work

How exactly did you reset the BIOS?

You need to clear CMOS to do this, see page 18 of the English motherhood instructions and section 14. You need to remove the battery and short the clear CMOS pins, or just try the clear CMOS pins first.

 

[Gmsc46]

How exactly did you reset the BIOS?

You need to clear CMOS to do this, see page 18 of the English motherhood instructions and section 14. You need to remove the battery and short the clear CMOS pins, or just try the clear CMOS pins first.

I've done this over and over again, but nothing worked

 

[sizzling]

I've done this over and over again, but nothing worked

Ok that will reset the BIOS to default settings with XMP off. I’d try with only 1 stick installed and see what happens.