OC to 4.4 Ghz, simple H60 cooler with dual fan in push/pull. Not the best cooler, I know. When I bought it I thought AIO's were the second coming of our lord & saviour. It was afterwards that I learned that the H60 is on par with a good air cooler / heatsink.
I just need a quick check because I'm reading so many conflicting information.
These are my temps when running Prime95 (29.4), the blend test.
As you see, the are mid to high 60's, with some serious variation going on between the cores.
View: https://imgur.com/a/kztWBoG
When I run the torture (maximum heat) test, the temperatures are about 10 C higher, but I read that that tests hammers AVX instructions in a way that is ludicrous, and is not representative.
Idle temps are in the 30's.
Bottom line: are these temperatures fine / normal?
I just need a quick check because I'm reading so many conflicting information.
These are my temps when running Prime95 (29.4), the blend test.
As you see, the are mid to high 60's, with some serious variation going on between the cores.
View: https://imgur.com/a/kztWBoG
When I run the torture (maximum heat) test, the temperatures are about 10 C higher, but I read that that tests hammers AVX instructions in a way that is ludicrous, and is not representative.
Idle temps are in the 30's.
Bottom line: are these temperatures fine / normal?