[SOLVED] Incorrect Voltage on XMP?

[computerwonder]

Hi

running xmp on my b550i gigabyte board with Corsair vengeance rgb pro 3600mhz. At stock I think these run at 1.2volts at 2733mhz however when I enable XMP I’ve been getting one long beep 3 short which indicate a ram issue. Had a look at the voltage when XMP is on and it was staying the same which looks far too low. Upped the voltage to 1.35 and the beeping issue has gone away. Anyone else had this problem with XMP

 

[lynx1021]

What is your CPU? There are different QVL list for different CPU types!!!!! not all DDR4 fits everything!! Some of the memory for the Matisse CPU runs as high as 1.5 volts depending on the ram model! Always look at your QVL. I built a system earlier this year with a 3700X and made sure the ram was on the right QVL and have had Zero problems. https://www.gigabyte.com/Motherboard/B550I-AORUS-PRO-AX-rev-10/support#support-doc