Interrupt Mode, APIC or PIC?

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I just built a system with an Asus A7V600-X motherboard (VIA chipset).
Now, I need to know whether I should set the interrupt mode to APIC
or PIC.
I intend to run Win98SE for a short while, then WinXP Pro until I get
another HD then I will dual boot with Win98SE and WinXP Pro.
Any ideas?

--
Posted using the http://www.hardwareforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.hardwareforumz.com/ASUS-Interrupt-Mode-APIC-PIC-ftopict57825.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.hardwareforumz.com/eform.php?p=291787

 

[Stevem]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

"forumposter32" <UseLinkToEmail@HardwareForumz.com> wrote in message
news:7_291787_11df435b4069c21d95ead3a52183bfb3@hardwareforumz.com...
>I just built a system with an Asus A7V600-X motherboard (VIA chipset).
> Now, I need to know whether I should set the interrupt mode to APIC
> or PIC.
> I intend to run Win98SE for a short while, then WinXP Pro until I get
> another HD then I will dual boot with Win98SE and WinXP Pro.
> Any ideas?
>
> --
> Posted using the http://www.hardwareforumz.com interface, at author's
> request
> Articles individually checked for conformance to usenet standards
> Topic URL:
> http://www.hardwareforumz.com/ASUS-Interrupt-Mode-APIC-PIC-ftopict57825.html
> Visit Topic URL to contact author (reg. req'd). Report abuse:
> http://www.hardwareforumz.com/eform.php?p=291787

No doubt someone will come in with a detailed explanation, but in brief, use
APIC; you will get 24 IRQ lines instead of the basic 16. Other differences,
of course, but in simple terms, the technology is newer, so if your board
supports it, use it.

Steve.

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

forumposter32 schrieb:

> I just built a system with an Asus A7V600-X motherboard (VIA chipset).
> Now, I need to know whether I should set the interrupt mode to APIC
> or PIC.
> I intend to run Win98SE for a short while, then WinXP Pro until I get
> another HD then I will dual boot with Win98SE and WinXP Pro.
> Any ideas?

Since Win98SE cannot use APIC mode for compatibility reasons (DOS!),
you'll have to stay with PIC mode.

Stephan
--
Home: http://stephan.win31.de/
PC#6: i440BX, 2xP3-500E, 704 MiB, 250+80 GB, R9k AGP 64 MiB, 110W