This is the computer I just ordered, it is my first self built machine.
Antec LifeStyle SONATA II Piano Black Steel ATX Mid Tower Computer Case 450Watt SmartPower 2.0 ATX 12V V2.0 for AMD & Intel systems Power Supply - Retail
SAPPHIRE 100186L Radeon X1950XT 256MB GDDR3 PCI Express x16 HDCP Video Card - Retail
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Standard System Memory Model F2-6400CL5D-2GBNQ - Retail
GIGABYTE GA-965P-DS3 Socket T (LGA 775) Intel P965 Express ATX Intel Motherboard - Retail
Intel Core 2 Duo E6300 Conroe 1.86GHz LGA 775 Processor Model BX80557E6300 - Retail
SONY Black IDE DVD-ROM Drive Model DDU1615/B2s - OEM
Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
Okay, now the problem was that whenever I began to run the windows XP cd, or even sat in the BIOS settings window the computer would just turn off. I was hearing alot of activity in the machine as well. At one point I was able to get it to begin partitioning the Hard drive, and an hour or so later when it was complete it just shut off again.
I also decided to try my old IDE hard drive and was able to boot up windows and go online and check dxdiag. Unfortunately, there is only one IDE port on the motherboard so I wasnt able to use the installation CD for the video card (the online drivers wouldnt work, said there wasnt the correct "drivers or hardware").
Now I can't get the computer to turn on at all, a few times the LED lights flashed on when I pushed the button but went off immediately, now nothing happens.
Also, the PSU fans don't turn on at all for some reason.
I made sure that the heatsink is properly connected and attached to the CPU as well.
Should I order a new PSU, do you think that is the problem? Anyway I can solve it?
Antec LifeStyle SONATA II Piano Black Steel ATX Mid Tower Computer Case 450Watt SmartPower 2.0 ATX 12V V2.0 for AMD & Intel systems Power Supply - Retail
SAPPHIRE 100186L Radeon X1950XT 256MB GDDR3 PCI Express x16 HDCP Video Card - Retail
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Standard System Memory Model F2-6400CL5D-2GBNQ - Retail
GIGABYTE GA-965P-DS3 Socket T (LGA 775) Intel P965 Express ATX Intel Motherboard - Retail
Intel Core 2 Duo E6300 Conroe 1.86GHz LGA 775 Processor Model BX80557E6300 - Retail
SONY Black IDE DVD-ROM Drive Model DDU1615/B2s - OEM
Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
Okay, now the problem was that whenever I began to run the windows XP cd, or even sat in the BIOS settings window the computer would just turn off. I was hearing alot of activity in the machine as well. At one point I was able to get it to begin partitioning the Hard drive, and an hour or so later when it was complete it just shut off again.
I also decided to try my old IDE hard drive and was able to boot up windows and go online and check dxdiag. Unfortunately, there is only one IDE port on the motherboard so I wasnt able to use the installation CD for the video card (the online drivers wouldnt work, said there wasnt the correct "drivers or hardware").
Now I can't get the computer to turn on at all, a few times the LED lights flashed on when I pushed the button but went off immediately, now nothing happens.
Also, the PSU fans don't turn on at all for some reason.
I made sure that the heatsink is properly connected and attached to the CPU as well.
Should I order a new PSU, do you think that is the problem? Anyway I can solve it?