Question Is my psu bad?

[Elie_4]

So yesterday I made a poste about my new built pc not turning on even case fan and ram and aio, I decided to check psu 1st obviously since my pc no power, since I still have my old build I used my new psu to see if it will power my old build so I connected the 24 pin to board and the cpu connector, the argb hub and boot it up, the only difference that only the light of the ram is on but no case fan or air cooler is on and when connected to the old psu again the pc is on like normal, I came to conclusion that psu is bad. I am righ or wrong?

 

[AntonyLovric]

I'm not sure, most computer shops have PSU testers that you could probably ask them to try / check the PSU. When you look at the ATX and CPU connections, how do the sleeves look inside the connectors? Any pushed back / deformed?

 

[Elie_4]

I'm not sure, most computer shops have PSU testers that you could probably ask them to try / check the PSU. When you look at the ATX and CPU connections, how do the sleeves look inside the connectors? Any pushed back / deformed?

The cpu connected easly, 24 pin connector almost in like 1% like super small gap, if I used more force I would have broken 24 slot.

 

[AntonyLovric]

24-pin connector, how does it look on the inside of it? Does the old PSU feel the same when connecting it to the board?

 

[Elie_4]

24-pin connector, how does it look on the inside of it? Does the old PSU feel the same when connecting it to the board?

Well I gone to the shop it appear the psu cable I was using was not right cable because all cables are not named or anything.