Hi all,
I accidentally unplugged the power cord of my PC while it was running. When I plugged it back in and tried to start it, it entered a boot loop. Here are some basic facts about my system:
In addition, I don't have a way to slave my SSD to another computer so I can't use things like Recuva. Is there a way that I can recover the SSD data from the source computer? I tried using EaseUS Data Recovery Wizard Bootable Media and booting from my dead PC, but the program isn't working. How can I fix this issue?
Thank you in advance to everyone who is able to help!
I accidentally unplugged the power cord of my PC while it was running. When I plugged it back in and tried to start it, it entered a boot loop. Here are some basic facts about my system:
- ASROCK z170 Pro4s motherboard
- Seagate BarraCuda 2TB HDD
- SK Hynix 250 GB SSD
- I can get into my BIOS with no issues, but I can't get into Windows
- Both my SSD and my HDD are detected in the BIOS
- No red lights on my motherboard
- My SSD was my main system disk (C: ), containing my OS (Windows 10) and some games
- My HDD was used to store some files (H: )
- Using
diskpart
has shown that for some reason, my SSD is now drive D: (instead of drive C: ) and my HDD is drive C: (instead of drive H: ) chkdsk /r C:
finished with no issues found (Initially I thought this meant my SSD was fine, but with the drives changing names this means the HDD seems fine)list volume
has shown that my SSD is now a RAW partition (previously NTFS)chkdsk /r D:
fails with "An unspecified error occurred"sfc /scannow
failed with "Windows Resource Protection could not perform the requested operation".bootrec /fixMBR
failed with "The request could not be performed because of an I/O device error"diskdrive get status
gives me a "Pred Fail" status
In addition, I don't have a way to slave my SSD to another computer so I can't use things like Recuva. Is there a way that I can recover the SSD data from the source computer? I tried using EaseUS Data Recovery Wizard Bootable Media and booting from my dead PC, but the program isn't working. How can I fix this issue?
Thank you in advance to everyone who is able to help!