is there a cheap full atx cube case?

[KenKraken]

is there a cheap full atx cube case? something like 50-100

 

[Darkbreeze]

This is the closest thing I've found:

http://www.newegg.com/Product/Product.aspx?Item=N82E16811119265&ignorebbr=1

 

[Darkbreeze]

Just came across this, which probably isn't available yet and is likely more expensive, but sure looks very sweet and will surely be available in the near future. Just thought I'd come back and post a link in case you wanted to check it out. This is the full E-ATX version. There is also apparently a micro-ATX and mini-ITX version as well, named Core X1, Core X2 and Core X9.

http://www.thermaltakeusa.com/products-model.aspx?id=C_00002562

 

[4Ryan6]

Just came across this, which probably isn't available yet and is likely more expensive, but sure looks very sweet and will surely be available in the near future. Just thought I'd come back and post a link in case you wanted to check it out. This is the full E-ATX version. There is also apparently a micro-ATX and mini-ITX version as well, named Core X1, Core X2 and Core X9.

http://www.thermaltakeusa.com/products-model.aspx?id=C_00002562

Very interesting discovery db!

I've been looking for a cube case to house my whole cooling setup and that just might do it?

 

[KenKraken]

two questions
1- what the diffrent between itx and atx?
2- can the word atx used for another componentes sized like psu?

 

[Darkbreeze]

Mini-ITX are very small, usually intended to be very quiet and mainly for either media center type builds or small form factor gaming only builds, or both. An ATX board won't fit in a mini-ITX case, and depending on the mounting location design mini-ITX boards won't mount up in a micro-ATX or ATX case unless it specifically indicates it supports it. Since this cube design by Thermaltake has all three versions, it's not an issue. Plus, this is kind of silly for a mini-ITX build as the whole point of that form factor is to minimize the size of the enclosure so it can easily fit on a shelf or entertainment center, or someplace similar where space is restricted, but it's a nice design if you simply want to use a single case and don't care about the modularity of it.

 

[Darkbreeze]

Very interesting discovery db!

I've been looking for a cube case to house my whole cooling setup and that just might do it?

Came across it here: http://www.maximumpc.com/ces_2015_thermaltake_launches_little_cases_massive_cooling

 

[Darkbreeze]

Case now available:

http://www.newegg.com/Product/Product.aspx?Item=N82E16811133275

 

[Darkbreeze]

And mATX version:

http://www.newegg.com/Product/Product.aspx?Item=N82E16811133276&nm_mc=KNC-GoogleAdwords-PC&cm_mmc=KNC-GoogleAdwords-PC-_-pla-_-Computer+Cases-_-N82E16811133276&gclid=CL6RuKX34MMCFYiVfgodqGYAtA&gclsrc=aw.ds

 

[TocSiK]

Corsair Air 540 for full ATX. Most are mATX. It's beautiful in white and the black one was just on sale a week ago for less than 100. It has a large hidden back section for all the cables and a huge side panel window.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811139022

 

[giantbucket]

i'll vote for the HAF XB series (in my case, the EVO). it's a great case, especially with large coolers and heavy cards - NO SAG! hot-swap bays for extra drives, plenty of access from sides/front/top, and enough fan spots for almost anyone. and it's SOLID.

 

[Perimo]

is there a cheap full atx cube case? something like 50-100

http://www.bhphotovideo.com/c/product/1017666-REG/coolermaster_rc_902xb_kkn2_coolermaster_haf_xb.html
Even cheaper 😀

 

[Darkbreeze]

You're only a year late. Thanks for the necro post. Closing thread.